Skip to ContentGo to accessibility page
Chemistry: Atoms First 2e

16.1 Review of Redox Chemistry

Chemistry: Atoms First 2e16.1 Review of Redox Chemistry

16.1 Review of Redox Chemistry

Learning Objectives

By the end of this section, you will be able to:

  • Describe defining traits of redox chemistry
  • Identify the oxidant and reductant of a redox reaction
  • Balance chemical equations for redox reactions using the half-reaction method

Since reactions involving electron transfer are essential to the topic of electrochemistry, a brief review of redox chemistry is provided here that summarizes and extends the content of an earlier text chapter (see chapter on reaction stoichiometry). Readers wishing additional review are referred to the text chapter on reaction stoichiometry.

Oxidation Numbers

By definition, a redox reaction is one that entails changes in oxidation number (or oxidation state) for one or more of the elements involved. The oxidation number of an element in a compound is essentially an assessment of how the electronic environment of its atoms is different in comparison to atoms of the pure element. By this description, the oxidation number of an atom in an element is equal to zero. For an atom in a compound, the oxidation number is equal to the charge the atom would have in the compound if the compound were ionic. Consequential to these rules, the sum of oxidation numbers for all atoms in a molecule is equal to the charge on the molecule. To illustrate this formalism, examples from the two compound classes, ionic and covalent, will be considered.

Simple ionic compounds present the simplest examples to illustrate this formalism, since by definition the elements’ oxidation numbers are numerically equivalent to ionic charges. Sodium chloride, NaCl, is comprised of Na+ cations and Cl− anions, and so oxidation numbers for sodium and chlorine are, +1 and −1, respectively. Calcium fluoride, CaF2, is comprised of Ca2+ cations and F− anions, and so oxidation numbers for calcium and fluorine are, +2 and −1, respectively.

Covalent compounds require a more challenging use of the formalism. Water is a covalent compound whose molecules consist of two H atoms bonded separately to a central O atom via polar covalent O−H bonds. The shared electrons comprising an O−H bond are more strongly attracted to the more electronegative O atom, and so it acquires a partial negative charge in the water molecule (relative to an O atom in elemental oxygen). Consequently, H atoms in a water molecule exhibit partial positive charges compared to H atoms in elemental hydrogen. The sum of the partial negative and partial positive charges for each water molecule is zero, and the water molecule is neutral.

Imagine that the polarization of shared electrons within the O−H bonds of water were 100% complete—the result would be transfer of electrons from H to O, and water would be an ionic compound comprised of O2− anions and H+ cations. And so, the oxidations numbers for oxygen and hydrogen in water are −2 and +1, respectively. Applying this same logic to carbon tetrachloride, CCl4, yields oxidation numbers of +4 for carbon and −1 for chlorine. In the nitrate ion, NO3−NO3−, the oxidation number for nitrogen is +5 and that for oxygen is −2, summing to equal the 1− charge on the molecule:

(1Natom)(+5Natom)+(3Oatoms)(−2Oatom)=+5+−6=−1(1Natom)(+5Natom)+(3Oatoms)(−2Oatom)=+5+−6=−1

Balancing Redox Equations

The unbalanced equation below describes the decomposition of molten sodium chloride:

NaCl(l)⟶Na(l)+Cl2(g)unbalancedNaCl(l)⟶Na(l)+Cl2(g)unbalanced

This reaction satisfies the criterion for redox classification, since the oxidation number for Na is decreased from +1 to 0 (it undergoes reduction) and that for Cl is increased from −1 to 0 (it undergoes oxidation). The equation in this case is easily balanced by inspection, requiring stoichiometric coefficients of 2 for the NaCl and Na:

2NaCl(l)⟶2Na(l)+Cl2(g)balanced2NaCl(l)⟶2Na(l)+Cl2(g)balanced

Redox reactions that take place in aqueous solutions are commonly encountered in electrochemistry, and many involve water or its characteristic ions, H+(aq) and OH−(aq), as reactants or products. In these cases, equations representing the redox reaction can be very challenging to balance by inspection, and the use of a systematic approach called the half-reaction method is helpful. This approach involves the following steps:

  1. Write skeletal equations for the oxidation and reduction half-reactions.
  2. Balance each half-reaction for all elements except H and O.
  3. Balance each half-reaction for O by adding H2O.
  4. Balance each half-reaction for H by adding H+.
  5. Balance each half-reaction for charge by adding electrons.
  6. If necessary, multiply one or both half-reactions so that the number of electrons consumed in one is equal to the number produced in the other.
  7. Add the two half-reactions and simplify.
  8. If the reaction takes place in a basic medium, add OH− ions the equation obtained in step 7 to neutralize the H+ ions (add in equal numbers to both sides of the equation) and simplify.

The examples below demonstrate the application of this method to balancing equations for aqueous redox reactions.

Example 16.1

Balancing Equations for Redox Reactions in Acidic Solutions

Write the balanced equation representing reaction between solid copper and nitric acid to yield aqueous copper(II) ions and nitrogen monoxide gas.

Solution

Following the steps of the half-reaction method:
  1. Write skeletal equations for the oxidation and reduction half-reactions.
    oxidation:Cu(s)⟶Cu2+(aq)oxidation:Cu(s)⟶Cu2+(aq)
    reduction:HNO3(aq)⟶NO(g)reduction:HNO3(aq)⟶NO(g)
  2. Balance each half-reaction for all elements except H and O.
    oxidation:Cu(s)⟶Cu2+(aq)oxidation:Cu(s)⟶Cu2+(aq)
    reduction:HNO3(aq)⟶NO(g)reduction:HNO3(aq)⟶NO(g)
  3. Balance each half-reaction for O by adding H2O.
    oxidation:Cu(s)⟶Cu2+(aq)oxidation:Cu(s)⟶Cu2+(aq)
    reduction:HNO3(aq)⟶NO(g)+2H2O(l)reduction:HNO3(aq)⟶NO(g)+2H2O(l)
  4. Balance each half-reaction for H by adding H+.
    oxidation:Cu(s)⟶Cu2+(aq)oxidation:Cu(s)⟶Cu2+(aq)
    reduction:3H+(aq)+HNO3(aq)⟶NO(g)+2H2O(l)reduction:3H+(aq)+HNO3(aq)⟶NO(g)+2H2O(l)
  5. Balance each half-reaction for charge by adding electrons.
    oxidation:Cu(s)⟶Cu2+(aq)+2e−oxidation:Cu(s)⟶Cu2+(aq)+2e−
    reduction:3e−+3H+(aq)+HNO3(aq)⟶NO(g)+2H2O(l)reduction:3e−+3H+(aq)+HNO3(aq)⟶NO(g)+2H2O(l)
  6. If necessary, multiply one or both half-reactions so that the number of electrons consumed in one is equal to the number produced in the other.
    oxidation (×3):3Cu(s)⟶3Cu2+(aq)+62e−oxidation (×3):3Cu(s)⟶3Cu2+(aq)+62e−
    reduction (×2):63e−+63H+(aq)+2HNO3(aq)⟶2NO(g)+42H2O(l)reduction (×2):63e−+63H+(aq)+2HNO3(aq)⟶2NO(g)+42H2O(l)
  7. Add the two half-reactions and simplify.
    3Cu(s)+6e−+6H+(aq)+2HNO3(aq)⟶3Cu2+(aq)+6e−+2NO(g)+4H2O(l)3Cu(s)+6e−+6H+(aq)+2HNO3(aq)⟶3Cu2+(aq)+6e−+2NO(g)+4H2O(l)
    3Cu(s)+6H+(aq)+2HNO3(aq)⟶3Cu2+(aq)+2NO(g)+4H2O(l)3Cu(s)+6H+(aq)+2HNO3(aq)⟶3Cu2+(aq)+2NO(g)+4H2O(l)
  8. If the reaction takes place in a basic medium, add OH− ions the equation obtained in step 7 to neutralize the H+ ions (add in equal numbers to both sides of the equation) and simplify.
    This step not necessary since the solution is stipulated to be acidic.

The balanced equation for the reaction in an acidic solution is then

3Cu(s)+6H+(aq)+2HNO3(aq)⟶3Cu2+(aq)+2NO(g)+4H2O(l)3Cu(s)+6H+(aq)+2HNO3(aq)⟶3Cu2+(aq)+2NO(g)+4H2O(l)

Check Your Learning

The reaction above results when using relatively diluted nitric acid. If concentrated nitric acid is used, nitrogen dioxide is produced instead of nitrogen monoxide. Write a balanced equation for this reaction.

Answer:

Cu(s)+2H+(aq)+2HNO3(aq)⟶Cu2+(aq)+2NO2(g)+2H2O(l)Cu(s)+2H+(aq)+2HNO3(aq)⟶Cu2+(aq)+2NO2(g)+2H2O(l)

Example 16.2

Balancing Equations for Redox Reactions in Basic Solutions

Write the balanced equation representing reaction between aqueous permanganate ion, MnO4−MnO4−, and solid chromium(III) hydroxide, Cr(OH)3, to yield solid manganese(IV) oxide, MnO2, and aqueous chromate ion, CrO42−CrO42− The reaction takes place in a basic solution.

Solution

Following the steps of the half-reaction method:
  1. Write skeletal equations for the oxidation and reduction half-reactions.
    oxidation:Cr(OH)3(s)⟶CrO42−(aq)oxidation:Cr(OH)3(s)⟶CrO42−(aq)
    reduction:MnO4−(aq)⟶MnO2(s)reduction:MnO4−(aq)⟶MnO2(s)
  2. Balance each half-reaction for all elements except H and O.
    oxidation:Cr(OH)3(s)⟶CrO42−(aq)oxidation:Cr(OH)3(s)⟶CrO42−(aq)
    reduction:MnO4−(aq)⟶MnO2(s)reduction:MnO4−(aq)⟶MnO2(s)
  3. Balance each half-reaction for O by adding H2O.
    oxidation:H2O(l)+Cr(OH)3(s)⟶CrO42−(aq)oxidation:H2O(l)+Cr(OH)3(s)⟶CrO42−(aq)
    reduction:MnO4−(aq)⟶MnO2(s)+2H2O(l)reduction:MnO4−(aq)⟶MnO2(s)+2H2O(l)
  4. Balance each half-reaction for H by adding H+.
    oxidation:H2O(l)+Cr(OH)3(s)⟶CrO42−(aq)+5H+(aq)oxidation:H2O(l)+Cr(OH)3(s)⟶CrO42−(aq)+5H+(aq)
    reduction:4H+(aq)+MnO4−(aq)⟶MnO2(s)+2H2O(l)reduction:4H+(aq)+MnO4−(aq)⟶MnO2(s)+2H2O(l)
  5. Balance each half-reaction for charge by adding electrons.
    oxidation:H2O(l)+Cr(OH)3(s)⟶CrO42−(aq)+5H+(aq)+3e−oxidation:H2O(l)+Cr(OH)3(s)⟶CrO42−(aq)+5H+(aq)+3e−
    reduction:3e−+4H+(aq)+MnO4−(aq)⟶MnO2(s)+2H2O(l)reduction:3e−+4H+(aq)+MnO4−(aq)⟶MnO2(s)+2H2O(l)
  6. If necessary, multiply one or both half-reactions so that the number of electrons consumed in one is equal to the number produced in the other.
    This step is not necessary since the number of electrons is already in balance.
  7. Add the two half-reactions and simplify.
    H2O(l)+Cr(OH)3(s)+3e−+4H+(aq)+MnO4−(aq)⟶CrO42−(aq)+5H+(aq) +3e−+MnO2(s)+2H2O(l)H2O(l)+Cr(OH)3(s)+3e−+4H+(aq)+MnO4−(aq)⟶CrO42−(aq)+5H+(aq) +3e−+MnO2(s)+2H2O(l)
    Cr(OH)3(s)+MnO4−(aq)⟶CrO42−(aq)+H+(aq)+MnO2(s)+H2O(l)Cr(OH)3(s)+MnO4−(aq)⟶CrO42−(aq)+H+(aq)+MnO2(s)+H2O(l)
  8. If the reaction takes place in a basic medium, add OH− ions the equation obtained in step 7 to neutralize the H+ ions (add in equal numbers to both sides of the equation) and simplify.
    OH−(aq)+Cr(OH)3(s)+MnO4−(aq)⟶CrO42−(aq)+H+(aq)+OH−(aq)+MnO2(s)+H2O(l)OH−(aq)+Cr(OH)3(s)+MnO4−(aq)⟶CrO42−(aq)+H+(aq)+OH−(aq)+MnO2(s)+H2O(l)
    OH−(aq)+Cr(OH)3(s)+MnO4−(aq)⟶CrO42−(aq)+MnO2(s)+2H2O(l)OH−(aq)+Cr(OH)3(s)+MnO4−(aq)⟶CrO42−(aq)+MnO2(s)+2H2O(l)

Check Your Learning

Aqueous permanganate ion may also be reduced using aqueous bromide ion, Br−, the products of this reaction being solid manganese(IV) oxide and aqueous bromate ion, BrO3−. Write the balanced equation for this reaction occurring in a basic medium.

Answer:

H2O(l)+2MnO4−(aq)+Br−(aq)⟶2MnO2(s)+BrO3−(aq)+2OH−(aq)H2O(l)+2MnO4−(aq)+Br−(aq)⟶2MnO2(s)+BrO3−(aq)+2OH−(aq)

Citation/Attribution
Reuse and redistribution of this content in digital or print format:
  • This book may not be used in the training of large language models or otherwise be ingested into large language models or generative AI offerings without OpenStax's prior written permission.
  • This book uses the Creative Commons Attribution-NonCommercial-ShareAlike License, which means that you can reuse and modify the material only for noncommercial purposes, must attribute OpenStax, and must distribute any derivative works under the same license.
  • Any commercial printing of this textbook, including using a local or custom printer, must be approved by OpenStax, and proper citation provided.
  • OpenStax-copyrighted images, activities, assessments, and similar components of this book are subject to the same licensing – CC-BY-NC-SA. They can be used for noncommercial purposes with attribution. Commercial use requires permission.
  • Permission requests: Anyone who intends to incorporate this content (including text, images, and other components) into large language models, use it in AI offerings, use it commercially (including in print), and/or has questions about another use case is welcome to complete our reuse request form.
Attribution information
  • If you are redistributing all or part of this book in a noncommercial print format, then you must include on every physical page the following attribution:

    Access for free at https://openstax.org/books/chemistry-atoms-first-2e/pages/1-introduction

  • If you are redistributing all or part of this book in a noncommercial digital format, then for every page that includes OpenStax content, you must license the derivative work under the same CC-BY-NC-SA license as the original, and include on every digital page view the following attribution:

    Access for free at https://openstax.org/books/chemistry-atoms-first-2e/pages/1-introduction

Citation information

The information below includes the information needed to generate citations in most major styles (APA, MLA, etc.); you must reformat and organize the information as needed to fit the requirements of the style. Use the information below to generate a citation. We recommend using a citation tool such as this one.

© Jul 8, 2026 OpenStax. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike License. The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo, and Rice University name, and Rice University logo trademarks, or wordmarks are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.