Skip to Content
OpenStax Logo
Principles of Microeconomics 2e

2.2 The Production Possibilities Frontier and Social Choices

Principles of Microeconomics 2e2.2 The Production Possibilities Frontier and Social Choices
  1. Preface
  2. 1 Welcome to Economics!
    1. Introduction
    2. 1.1 What Is Economics, and Why Is It Important?
    3. 1.2 Microeconomics and Macroeconomics
    4. 1.3 How Economists Use Theories and Models to Understand Economic Issues
    5. 1.4 How To Organize Economies: An Overview of Economic Systems
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
  3. 2 Choice in a World of Scarcity
    1. Introduction to Choice in a World of Scarcity
    2. 2.1 How Individuals Make Choices Based on Their Budget Constraint
    3. 2.2 The Production Possibilities Frontier and Social Choices
    4. 2.3 Confronting Objections to the Economic Approach
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  4. 3 Demand and Supply
    1. Introduction to Demand and Supply
    2. 3.1 Demand, Supply, and Equilibrium in Markets for Goods and Services
    3. 3.2 Shifts in Demand and Supply for Goods and Services
    4. 3.3 Changes in Equilibrium Price and Quantity: The Four-Step Process
    5. 3.4 Price Ceilings and Price Floors
    6. 3.5 Demand, Supply, and Efficiency
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  5. 4 Labor and Financial Markets
    1. Introduction to Labor and Financial Markets
    2. 4.1 Demand and Supply at Work in Labor Markets
    3. 4.2 Demand and Supply in Financial Markets
    4. 4.3 The Market System as an Efficient Mechanism for Information
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  6. 5 Elasticity
    1. Introduction to Elasticity
    2. 5.1 Price Elasticity of Demand and Price Elasticity of Supply
    3. 5.2 Polar Cases of Elasticity and Constant Elasticity
    4. 5.3 Elasticity and Pricing
    5. 5.4 Elasticity in Areas Other Than Price
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  7. 6 Consumer Choices
    1. Introduction to Consumer Choices
    2. 6.1 Consumption Choices
    3. 6.2 How Changes in Income and Prices Affect Consumption Choices
    4. 6.3 Behavioral Economics: An Alternative Framework for Consumer Choice
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  8. 7 Production, Costs, and Industry Structure
    1. Introduction to Production, Costs, and Industry Structure
    2. 7.1 Explicit and Implicit Costs, and Accounting and Economic Profit
    3. 7.2 Production in the Short Run
    4. 7.3 Costs in the Short Run
    5. 7.4 Production in the Long Run
    6. 7.5 Costs in the Long Run
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  9. 8 Perfect Competition
    1. Introduction to Perfect Competition
    2. 8.1 Perfect Competition and Why It Matters
    3. 8.2 How Perfectly Competitive Firms Make Output Decisions
    4. 8.3 Entry and Exit Decisions in the Long Run
    5. 8.4 Efficiency in Perfectly Competitive Markets
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  10. 9 Monopoly
    1. Introduction to a Monopoly
    2. 9.1 How Monopolies Form: Barriers to Entry
    3. 9.2 How a Profit-Maximizing Monopoly Chooses Output and Price
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  11. 10 Monopolistic Competition and Oligopoly
    1. Introduction to Monopolistic Competition and Oligopoly
    2. 10.1 Monopolistic Competition
    3. 10.2 Oligopoly
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  12. 11 Monopoly and Antitrust Policy
    1. Introduction to Monopoly and Antitrust Policy
    2. 11.1 Corporate Mergers
    3. 11.2 Regulating Anticompetitive Behavior
    4. 11.3 Regulating Natural Monopolies
    5. 11.4 The Great Deregulation Experiment
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  13. 12 Environmental Protection and Negative Externalities
    1. Introduction to Environmental Protection and Negative Externalities
    2. 12.1 The Economics of Pollution
    3. 12.2 Command-and-Control Regulation
    4. 12.3 Market-Oriented Environmental Tools
    5. 12.4 The Benefits and Costs of U.S. Environmental Laws
    6. 12.5 International Environmental Issues
    7. 12.6 The Tradeoff between Economic Output and Environmental Protection
    8. Key Terms
    9. Key Concepts and Summary
    10. Self-Check Questions
    11. Review Questions
    12. Critical Thinking Questions
    13. Problems
  14. 13 Positive Externalities and Public Goods
    1. Introduction to Positive Externalities and Public Goods
    2. 13.1 Why the Private Sector Underinvests in Innovation
    3. 13.2 How Governments Can Encourage Innovation
    4. 13.3 Public Goods
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  15. 14 Labor Markets and Income
    1. Introduction to Labor Markets and Income
    2. 14.1 The Theory of Labor Markets
    3. 14.2 Wages and Employment in an Imperfectly Competitive Labor Market
    4. 14.3 Market Power on the Supply Side of Labor Markets: Unions
    5. 14.4 Bilateral Monopoly
    6. 14.5 Employment Discrimination
    7. 14.6 Immigration
    8. Key Terms
    9. Key Concepts and Summary
    10. Self-Check Questions
    11. Review Questions
    12. Critical Thinking Questions
  16. 15 Poverty and Economic Inequality
    1. Introduction to Poverty and Economic Inequality
    2. 15.1 Drawing the Poverty Line
    3. 15.2 The Poverty Trap
    4. 15.3 The Safety Net
    5. 15.4 Income Inequality: Measurement and Causes
    6. 15.5 Government Policies to Reduce Income Inequality
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  17. 16 Information, Risk, and Insurance
    1. Introduction to Information, Risk, and Insurance
    2. 16.1 The Problem of Imperfect Information and Asymmetric Information
    3. 16.2 Insurance and Imperfect Information
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  18. 17 Financial Markets
    1. Introduction to Financial Markets
    2. 17.1 How Businesses Raise Financial Capital
    3. 17.2 How Households Supply Financial Capital
    4. 17.3 How to Accumulate Personal Wealth
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  19. 18 Public Economy
    1. Introduction to Public Economy
    2. 18.1 Voter Participation and Costs of Elections
    3. 18.2 Special Interest Politics
    4. 18.3 Flaws in the Democratic System of Government
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  20. 19 International Trade
    1. Introduction to International Trade
    2. 19.1 Absolute and Comparative Advantage
    3. 19.2 What Happens When a Country Has an Absolute Advantage in All Goods
    4. 19.3 Intra-industry Trade between Similar Economies
    5. 19.4 The Benefits of Reducing Barriers to International Trade
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  21. 20 Globalization and Protectionism
    1. Introduction to Globalization and Protectionism
    2. 20.1 Protectionism: An Indirect Subsidy from Consumers to Producers
    3. 20.2 International Trade and Its Effects on Jobs, Wages, and Working Conditions
    4. 20.3 Arguments in Support of Restricting Imports
    5. 20.4 How Governments Enact Trade Policy: Globally, Regionally, and Nationally
    6. 20.5 The Tradeoffs of Trade Policy
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  22. A | The Use of Mathematics in Principles of Economics
  23. B | Indifference Curves
  24. C | Present Discounted Value
  25. Answer Key
    1. Chapter 1
    2. Chapter 2
    3. Chapter 3
    4. Chapter 4
    5. Chapter 5
    6. Chapter 6
    7. Chapter 7
    8. Chapter 8
    9. Chapter 9
    10. Chapter 10
    11. Chapter 11
    12. Chapter 12
    13. Chapter 13
    14. Chapter 14
    15. Chapter 15
    16. Chapter 16
    17. Chapter 17
    18. Chapter 18
    19. Chapter 19
    20. Chapter 20
  26. References
  27. Index

By the end of this section, you will be able to:

  • Interpret production possibilities frontier graphs
  • Contrast a budget constraint and a production possibilities frontier
  • Explain the relationship between a production possibilities frontier and the law of diminishing returns
  • Contrast productive efficiency and allocative efficiency
  • Define comparative advantage

Just as individuals cannot have everything they want and must instead make choices, society as a whole cannot have everything it might want, either. This section of the chapter will explain the constraints society faces, using a model called the production possibilities frontier (PPF). There are more similarities than differences between individual choice and social choice. As you read this section, focus on the similarities.

Because society has limited resources (e.g., labor, land, capital, raw materials) at any point in time, there is a limit to the quantities of goods and services it can produce. Suppose a society desires two products, healthcare and education. The production possibilities frontier in Figure 2.3 illustrates this situation.

 The graph shows that a society has limited resources and often must prioritize where to invest. On this graph, the y-axis is ʺHealthcare,ʺ and the x-axis is ʺEducation.ʺ
Figure 2.3 A Healthcare vs. Education Production Possibilities Frontier This production possibilities frontier shows a tradeoff between devoting social resources to healthcare and devoting them to education. At A all resources go to healthcare and at B, most go to healthcare. At D most resources go to education, and at F, all go to education.

Figure 2.3 shows healthcare on the vertical axis and education on the horizontal axis. If the society were to allocate all of its resources to healthcare, it could produce at point A. However, it would not have any resources to produce education. If it were to allocate all of its resources to education, it could produce at point F. Alternatively, the society could choose to produce any combination of healthcare and education on the production possibilities frontier. In effect, the production possibilities frontier plays the same role for society as the budget constraint plays for Alphonso. Society can choose any combination of the two goods on or inside the PPF. However, it does not have enough resources to produce outside the PPF.

Most importantly, the production possibilities frontier clearly shows the tradeoff between healthcare and education. Suppose society has chosen to operate at point B, and it is considering producing more education. Because the PPF is downward sloping from left to right, the only way society can obtain more education is by giving up some healthcare. That is the tradeoff society faces. Suppose it considers moving from point B to point C. What would the opportunity cost be for the additional education? The opportunity cost would be the healthcare society has to forgo. Just as with Alphonso’s budget constraint, the slope of the production possibilities frontier shows the opportunity cost. By now you might be saying, “Hey, this PPF is sounding like the budget constraint.” If so, read the following Clear It Up feature.

Clear It Up

What’s the difference between a budget constraint and a PPF?

There are two major differences between a budget constraint and a production possibilities frontier. The first is the fact that the budget constraint is a straight line. This is because its slope is given by the relative prices of the two goods, which from the point of view of an individual consumer, are fixed, so the slope doesn't change. In contrast, the PPF has a curved shape because of the law of the diminishing returns. Thus, the slope is different at various points on the PPF. The second major difference is the absence of specific numbers on the axes of the PPF. There are no specific numbers because we do not know the exact amount of resources this imaginary economy has, nor do we know how many resources it takes to produce healthcare and how many resources it takes to produce education. If this were a real world example, that data would be available.

Whether or not we have specific numbers, conceptually we can measure the opportunity cost of additional education as society moves from point B to point C on the PPF. We measure the additional education by the horizontal distance between B and C. The foregone healthcare is given by the vertical distance between B and C. The slope of the PPF between B and C is (approximately) the vertical distance (the “rise”) over the horizontal distance (the “run”). This is the opportunity cost of the additional education.

The PPF and the Law of Increasing Opportunity Cost

The budget constraints that we presented earlier in this chapter, showing individual choices about what quantities of goods to consume, were all straight lines. The reason for these straight lines was that the relative prices of the two goods in the consumption budget constraint determined the slope of the budget constraint. However, we drew the production possibilities frontier for healthcare and education as a curved line. Why does the PPF have a different shape?

To understand why the PPF is curved, start by considering point A at the top left-hand side of the PPF. At point A, all available resources are devoted to healthcare and none are left for education. This situation would be extreme and even ridiculous. For example, children are seeing a doctor every day, whether they are sick or not, but not attending school. People are having cosmetic surgery on every part of their bodies, but no high school or college education exists. Now imagine that some of these resources are diverted from healthcare to education, so that the economy is at point B instead of point A. Diverting some resources away from A to B causes relatively little reduction in health because the last few marginal dollars going into healthcare services are not producing much additional gain in health. However, putting those marginal dollars into education, which is completely without resources at point A, can produce relatively large gains. For this reason, the shape of the PPF from A to B is relatively flat, representing a relatively small drop-off in health and a relatively large gain in education.

Now consider the other end, at the lower right, of the production possibilities frontier. Imagine that society starts at choice D, which is devoting nearly all resources to education and very few to healthcare, and moves to point F, which is devoting all spending to education and none to healthcare. For the sake of concreteness, you can imagine that in the movement from D to F, the last few doctors must become high school science teachers, the last few nurses must become school librarians rather than dispensers of vaccinations, and the last few emergency rooms are turned into kindergartens. The gains to education from adding these last few resources to education are very small. However, the opportunity cost lost to health will be fairly large, and thus the slope of the PPF between D and F is steep, showing a large drop in health for only a small gain in education.

The lesson is not that society is likely to make an extreme choice like devoting no resources to education at point A or no resources to health at point F. Instead, the lesson is that the gains from committing additional marginal resources to education depend on how much is already being spent. If on the one hand, very few resources are currently committed to education, then an increase in resources used can bring relatively large gains. On the other hand, if a large number of resources are already committed to education, then committing additional resources will bring relatively smaller gains.

This pattern is common enough that economists have given it a name: the law of increasing opportunity cost, which holds that as production of a good or service increases, the marginal opportunity cost of producing it increases as well. This happens because some resources are better suited for producing certain goods and services instead of others. When government spends a certain amount more on reducing crime, for example, the original increase in opportunity cost of reducing crime could be relatively small. However, additional increases typically cause relatively larger increases in the opportunity cost of reducing crime, and paying for enough police and security to reduce crime to nothing at all would be a tremendously high opportunity cost.

The curvature of the production possibilities frontier shows that as we add more resources to education, moving from left to right along the horizontal axis, the original increase in opportunity cost is fairly small, but gradually increases. Thus, the slope of the PPF is relatively flat near the vertical-axis intercept. Conversely, as we add more resources to healthcare, moving from bottom to top on the vertical axis, the original declines in opportunity cost are fairly large, but again gradually diminish. Thus, the slope of the PPF is relatively steep near the horizontal-axis intercept. In this way, the law of increasing opportunity cost produces the outward-bending shape of the production possibilities frontier.

Productive Efficiency and Allocative Efficiency

The study of economics does not presume to tell a society what choice it should make along its production possibilities frontier. In a market-oriented economy with a democratic government, the choice will involve a mixture of decisions by individuals, firms, and government. However, economics can point out that some choices are unambiguously better than others. This observation is based on the concept of efficiency. In everyday usage, efficiency refers to lack of waste. An inefficient machine operates at high cost, while an efficient machine operates at lower cost, because it is not wasting energy or materials. An inefficient organization operates with long delays and high costs, while an efficient organization meets schedules, is focused, and performs within budget.

The production possibilities frontier can illustrate two kinds of efficiency: productive efficiency and allocative efficiency. Figure 2.4 illustrates these ideas using a production possibilities frontier between healthcare and education.

The graph shows that when a greater quantity of one good increases, the quantity of other goods will decrease. Point R on the graph represents the good that drops in quantity as a result of greater efficiency in producing other goods.
Figure 2.4 Productive and Allocative Efficiency Productive efficiency means it is impossible to produce more of one good without decreasing the quantity that is produced of another good. Thus, all choices along a given PPF like B, C, and D display productive efficiency, but R does not. Allocative efficiency means that the particular mix of goods being produced—that is, the specific choice along the production possibilities frontier—represents the allocation that society most desires.

Productive efficiency means that, given the available inputs and technology, it is impossible to produce more of one good without decreasing the quantity that is produced of another good. All choices on the PPF in Figure 2.4, including A, B, C, D, and F, display productive efficiency. As a firm moves from any one of these choices to any other, either healthcare increases and education decreases or vice versa. However, any choice inside the production possibilities frontier is productively inefficient and wasteful because it is possible to produce more of one good, the other good, or some combination of both goods.

For example, point R is productively inefficient because it is possible at choice C to have more of both goods: education on the horizontal axis is higher at point C than point R (E2 is greater than E1), and healthcare on the vertical axis is also higher at point C than point R (H2 is great than H1).

We can show the particular mix of goods and services produced—that is, the specific combination of selected healthcare and education along the production possibilities frontier—as a ray (line) from the origin to a specific point on the PPF. Output mixes that had more healthcare (and less education) would have a steeper ray, while those with more education (and less healthcare) would have a flatter ray.

Allocative efficiency means that the particular combination of goods and services on the production possibility curve that a society produces represents the combination that society most desires. How to determine what a society desires can be a controversial question, and is usually a discussion in political science, sociology, and philosophy classes as well as in economics. At its most basic, allocative efficiency means producers supply the quantity of each product that consumers demand. Only one of the productively efficient choices will be the allocatively efficient choice for society as a whole.

Why Society Must Choose

In Welcome to Economics! we learned that every society faces the problem of scarcity, where limited resources conflict with unlimited needs and wants. The production possibilities curve illustrates the choices involved in this dilemma.

Every economy faces two situations in which it may be able to expand consumption of all goods. In the first case, a society may discover that it has been using its resources inefficiently, in which case by improving efficiency and producing on the production possibilities frontier, it can have more of all goods (or at least more of some and less of none). In the second case, as resources grow over a period of years (e.g., more labor and more capital), the economy grows. As it does, the production possibilities frontier for a society will tend to shift outward and society will be able to afford more of all goods.

However, improvements in productive efficiency take time to discover and implement, and economic growth happens only gradually. Thus, a society must choose between tradeoffs in the present. For government, this process often involves trying to identify where additional spending could do the most good and where reductions in spending would do the least harm. At the individual and firm level, the market economy coordinates a process in which firms seek to produce goods and services in the quantity, quality, and price that people want. However, for both the government and the market economy in the short term, increases in production of one good typically mean offsetting decreases somewhere else in the economy.

The PPF and Comparative Advantage

While every society must choose how much of each good or service it should produce, it does not need to produce every single good it consumes. Often how much of a good a country decides to produce depends on how expensive it is to produce it versus buying it from a different country. As we saw earlier, the curvature of a country’s PPF gives us information about the tradeoff between devoting resources to producing one good versus another. In particular, its slope gives the opportunity cost of producing one more unit of the good in the x-axis in terms of the other good (in the y-axis). Countries tend to have different opportunity costs of producing a specific good, either because of different climates, geography, technology, or skills.

Suppose two countries, the US and Brazil, need to decide how much they will produce of two crops: sugar cane and wheat. Due to its climatic conditions, Brazil can produce quite a bit of sugar cane per acre but not much wheat. Conversely, the U.S. can produce large amounts of wheat per acre, but not much sugar cane. Clearly, Brazil has a lower opportunity cost of producing sugar cane (in terms of wheat) than the U.S. The reverse is also true: the U.S. has a lower opportunity cost of producing wheat than Brazil. We illustrate this by the PPFs of the two countries in Figure 2.5.

This graph shows two images. Both images have y-axes labeled “Sugar Cane” and x-axes labeled “Wheat.” In image (a), Brazil’s Sugar Cane production is nearly double the production of its wheat. In image (b), the U.S.’s Sugar Cane production is nearly half the production of its wheat.
Figure 2.5 Production Possibility Frontier for the U.S. and Brazil The U.S. PPF is flatter than the Brazil PPF implying that the opportunity cost of wheat in terms of sugar cane is lower in the U.S. than in Brazil. Conversely, the opportunity cost of sugar cane is lower in Brazil. The U.S. has comparative advantage in wheat and Brazil has comparative advantage in sugar cane.

When a country can produce a good at a lower opportunity cost than another country, we say that this country has a comparative advantage in that good. Comparative advantage is not the same as absolute advantage, which is when a country can produce more of a good. In our example, Brazil has an absolute advantage in sugar cane and the U.S. has an absolute advantage in wheat. One can easily see this with a simple observation of the extreme production points in the PPFs of the two countries. If Brazil devoted all of its resources to producing wheat, it would be producing at point A. If however it had devoted all of its resources to producing sugar cane instead, it would be producing a much larger amount than the U.S., at point B.

The slope of the PPF gives the opportunity cost of producing an additional unit of wheat. While the slope is not constant throughout the PPFs, it is quite apparent that the PPF in Brazil is much steeper than in the U.S., and therefore the opportunity cost of wheat generally higher in Brazil. In the chapter on International Trade you will learn that countries’ differences in comparative advantage determine which goods they will choose to produce and trade. When countries engage in trade, they specialize in the production of the goods in which they have comparative advantage, and trade part of that production for goods in which they do not have comparative advantage. With trade, manufacturers produce goods where the opportunity cost is lowest, so total production increases, benefiting both trading parties.

Citation/Attribution

Want to cite, share, or modify this book? This book is Creative Commons Attribution License 4.0 and you must attribute OpenStax.

Attribution information
  • If you are redistributing all or part of this book in a print format, then you must include on every physical page the following attribution:
    Access for free at https://openstax.org/books/principles-microeconomics-2e/pages/1-introduction
  • If you are redistributing all or part of this book in a digital format, then you must include on every digital page view the following attribution:
    Access for free at https://openstax.org/books/principles-microeconomics-2e/pages/1-introduction
Citation information

© Jan 21, 2020 OpenStax. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution License 4.0 license. The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.