Skip to ContentGo to accessibility pageKeyboard shortcuts menu
OpenStax Logo
Principles of Economics 2e

A | The Use of Mathematics in Principles of Economics

Principles of Economics 2eA | The Use of Mathematics in Principles of Economics

Table of contents
  1. Preface
  2. 1 Welcome to Economics!
    1. Introduction
    2. 1.1 What Is Economics, and Why Is It Important?
    3. 1.2 Microeconomics and Macroeconomics
    4. 1.3 How Economists Use Theories and Models to Understand Economic Issues
    5. 1.4 How To Organize Economies: An Overview of Economic Systems
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
  3. 2 Choice in a World of Scarcity
    1. Introduction to Choice in a World of Scarcity
    2. 2.1 How Individuals Make Choices Based on Their Budget Constraint
    3. 2.2 The Production Possibilities Frontier and Social Choices
    4. 2.3 Confronting Objections to the Economic Approach
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  4. 3 Demand and Supply
    1. Introduction to Demand and Supply
    2. 3.1 Demand, Supply, and Equilibrium in Markets for Goods and Services
    3. 3.2 Shifts in Demand and Supply for Goods and Services
    4. 3.3 Changes in Equilibrium Price and Quantity: The Four-Step Process
    5. 3.4 Price Ceilings and Price Floors
    6. 3.5 Demand, Supply, and Efficiency
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  5. 4 Labor and Financial Markets
    1. Introduction to Labor and Financial Markets
    2. 4.1 Demand and Supply at Work in Labor Markets
    3. 4.2 Demand and Supply in Financial Markets
    4. 4.3 The Market System as an Efficient Mechanism for Information
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  6. 5 Elasticity
    1. Introduction to Elasticity
    2. 5.1 Price Elasticity of Demand and Price Elasticity of Supply
    3. 5.2 Polar Cases of Elasticity and Constant Elasticity
    4. 5.3 Elasticity and Pricing
    5. 5.4 Elasticity in Areas Other Than Price
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  7. 6 Consumer Choices
    1. Introduction to Consumer Choices
    2. 6.1 Consumption Choices
    3. 6.2 How Changes in Income and Prices Affect Consumption Choices
    4. 6.3 Behavioral Economics: An Alternative Framework for Consumer Choice
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  8. 7 Production, Costs, and Industry Structure
    1. Introduction to Production, Costs, and Industry Structure
    2. 7.1 Explicit and Implicit Costs, and Accounting and Economic Profit
    3. 7.2 Production in the Short Run
    4. 7.3 Costs in the Short Run
    5. 7.4 Production in the Long Run
    6. 7.5 Costs in the Long Run
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  9. 8 Perfect Competition
    1. Introduction to Perfect Competition
    2. 8.1 Perfect Competition and Why It Matters
    3. 8.2 How Perfectly Competitive Firms Make Output Decisions
    4. 8.3 Entry and Exit Decisions in the Long Run
    5. 8.4 Efficiency in Perfectly Competitive Markets
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  10. 9 Monopoly
    1. Introduction to a Monopoly
    2. 9.1 How Monopolies Form: Barriers to Entry
    3. 9.2 How a Profit-Maximizing Monopoly Chooses Output and Price
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  11. 10 Monopolistic Competition and Oligopoly
    1. Introduction to Monopolistic Competition and Oligopoly
    2. 10.1 Monopolistic Competition
    3. 10.2 Oligopoly
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  12. 11 Monopoly and Antitrust Policy
    1. Introduction to Monopoly and Antitrust Policy
    2. 11.1 Corporate Mergers
    3. 11.2 Regulating Anticompetitive Behavior
    4. 11.3 Regulating Natural Monopolies
    5. 11.4 The Great Deregulation Experiment
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  13. 12 Environmental Protection and Negative Externalities
    1. Introduction to Environmental Protection and Negative Externalities
    2. 12.1 The Economics of Pollution
    3. 12.2 Command-and-Control Regulation
    4. 12.3 Market-Oriented Environmental Tools
    5. 12.4 The Benefits and Costs of U.S. Environmental Laws
    6. 12.5 International Environmental Issues
    7. 12.6 The Tradeoff between Economic Output and Environmental Protection
    8. Key Terms
    9. Key Concepts and Summary
    10. Self-Check Questions
    11. Review Questions
    12. Critical Thinking Questions
    13. Problems
  14. 13 Positive Externalities and Public Goods
    1. Introduction to Positive Externalities and Public Goods
    2. 13.1 Why the Private Sector Underinvests in Innovation
    3. 13.2 How Governments Can Encourage Innovation
    4. 13.3 Public Goods
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  15. 14 Labor Markets and Income
    1. Introduction to Labor Markets and Income
    2. 14.1 The Theory of Labor Markets
    3. 14.2 Wages and Employment in an Imperfectly Competitive Labor Market
    4. 14.3 Market Power on the Supply Side of Labor Markets: Unions
    5. 14.4 Bilateral Monopoly
    6. 14.5 Employment Discrimination
    7. 14.6 Immigration
    8. Key Terms
    9. Key Concepts and Summary
    10. Self-Check Questions
    11. Review Questions
    12. Critical Thinking Questions
  16. 15 Poverty and Economic Inequality
    1. Introduction to Poverty and Economic Inequality
    2. 15.1 Drawing the Poverty Line
    3. 15.2 The Poverty Trap
    4. 15.3 The Safety Net
    5. 15.4 Income Inequality: Measurement and Causes
    6. 15.5 Government Policies to Reduce Income Inequality
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  17. 16 Information, Risk, and Insurance
    1. Introduction to Information, Risk, and Insurance
    2. 16.1 The Problem of Imperfect Information and Asymmetric Information
    3. 16.2 Insurance and Imperfect Information
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  18. 17 Financial Markets
    1. Introduction to Financial Markets
    2. 17.1 How Businesses Raise Financial Capital
    3. 17.2 How Households Supply Financial Capital
    4. 17.3 How to Accumulate Personal Wealth
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  19. 18 Public Economy
    1. Introduction to Public Economy
    2. 18.1 Voter Participation and Costs of Elections
    3. 18.2 Special Interest Politics
    4. 18.3 Flaws in the Democratic System of Government
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  20. 19 The Macroeconomic Perspective
    1. Introduction to the Macroeconomic Perspective
    2. 19.1 Measuring the Size of the Economy: Gross Domestic Product
    3. 19.2 Adjusting Nominal Values to Real Values
    4. 19.3 Tracking Real GDP over Time
    5. 19.4 Comparing GDP among Countries
    6. 19.5 How Well GDP Measures the Well-Being of Society
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  21. 20 Economic Growth
    1. Introduction to Economic Growth
    2. 20.1 The Relatively Recent Arrival of Economic Growth
    3. 20.2 Labor Productivity and Economic Growth
    4. 20.3 Components of Economic Growth
    5. 20.4 Economic Convergence
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  22. 21 Unemployment
    1. Introduction to Unemployment
    2. 21.1 How Economists Define and Compute Unemployment Rate
    3. 21.2 Patterns of Unemployment
    4. 21.3 What Causes Changes in Unemployment over the Short Run
    5. 21.4 What Causes Changes in Unemployment over the Long Run
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  23. 22 Inflation
    1. Introduction to Inflation
    2. 22.1 Tracking Inflation
    3. 22.2 How to Measure Changes in the Cost of Living
    4. 22.3 How the U.S. and Other Countries Experience Inflation
    5. 22.4 The Confusion Over Inflation
    6. 22.5 Indexing and Its Limitations
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  24. 23 The International Trade and Capital Flows
    1. Introduction to the International Trade and Capital Flows
    2. 23.1 Measuring Trade Balances
    3. 23.2 Trade Balances in Historical and International Context
    4. 23.3 Trade Balances and Flows of Financial Capital
    5. 23.4 The National Saving and Investment Identity
    6. 23.5 The Pros and Cons of Trade Deficits and Surpluses
    7. 23.6 The Difference between Level of Trade and the Trade Balance
    8. Key Terms
    9. Key Concepts and Summary
    10. Self-Check Questions
    11. Review Questions
    12. Critical Thinking Questions
    13. Problems
  25. 24 The Aggregate Demand/Aggregate Supply Model
    1. Introduction to the Aggregate Supply–Aggregate Demand Model
    2. 24.1 Macroeconomic Perspectives on Demand and Supply
    3. 24.2 Building a Model of Aggregate Demand and Aggregate Supply
    4. 24.3 Shifts in Aggregate Supply
    5. 24.4 Shifts in Aggregate Demand
    6. 24.5 How the AD/AS Model Incorporates Growth, Unemployment, and Inflation
    7. 24.6 Keynes’ Law and Say’s Law in the AD/AS Model
    8. Key Terms
    9. Key Concepts and Summary
    10. Self-Check Questions
    11. Review Questions
    12. Critical Thinking Questions
    13. Problems
  26. 25 The Keynesian Perspective
    1. Introduction to the Keynesian Perspective
    2. 25.1 Aggregate Demand in Keynesian Analysis
    3. 25.2 The Building Blocks of Keynesian Analysis
    4. 25.3 The Phillips Curve
    5. 25.4 The Keynesian Perspective on Market Forces
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
  27. 26 The Neoclassical Perspective
    1. Introduction to the Neoclassical Perspective
    2. 26.1 The Building Blocks of Neoclassical Analysis
    3. 26.2 The Policy Implications of the Neoclassical Perspective
    4. 26.3 Balancing Keynesian and Neoclassical Models
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  28. 27 Money and Banking
    1. Introduction to Money and Banking
    2. 27.1 Defining Money by Its Functions
    3. 27.2 Measuring Money: Currency, M1, and M2
    4. 27.3 The Role of Banks
    5. 27.4 How Banks Create Money
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  29. 28 Monetary Policy and Bank Regulation
    1. Introduction to Monetary Policy and Bank Regulation
    2. 28.1 The Federal Reserve Banking System and Central Banks
    3. 28.2 Bank Regulation
    4. 28.3 How a Central Bank Executes Monetary Policy
    5. 28.4 Monetary Policy and Economic Outcomes
    6. 28.5 Pitfalls for Monetary Policy
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  30. 29 Exchange Rates and International Capital Flows
    1. Introduction to Exchange Rates and International Capital Flows
    2. 29.1 How the Foreign Exchange Market Works
    3. 29.2 Demand and Supply Shifts in Foreign Exchange Markets
    4. 29.3 Macroeconomic Effects of Exchange Rates
    5. 29.4 Exchange Rate Policies
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  31. 30 Government Budgets and Fiscal Policy
    1. Introduction to Government Budgets and Fiscal Policy
    2. 30.1 Government Spending
    3. 30.2 Taxation
    4. 30.3 Federal Deficits and the National Debt
    5. 30.4 Using Fiscal Policy to Fight Recession, Unemployment, and Inflation
    6. 30.5 Automatic Stabilizers
    7. 30.6 Practical Problems with Discretionary Fiscal Policy
    8. 30.7 The Question of a Balanced Budget
    9. Key Terms
    10. Key Concepts and Summary
    11. Self-Check Questions
    12. Review Questions
    13. Critical Thinking Questions
    14. Problems
  32. 31 The Impacts of Government Borrowing
    1. Introduction to the Impacts of Government Borrowing
    2. 31.1 How Government Borrowing Affects Investment and the Trade Balance
    3. 31.2 Fiscal Policy and the Trade Balance
    4. 31.3 How Government Borrowing Affects Private Saving
    5. 31.4 Fiscal Policy, Investment, and Economic Growth
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  33. 32 Macroeconomic Policy Around the World
    1. Introduction to Macroeconomic Policy around the World
    2. 32.1 The Diversity of Countries and Economies across the World
    3. 32.2 Improving Countries’ Standards of Living
    4. 32.3 Causes of Unemployment around the World
    5. 32.4 Causes of Inflation in Various Countries and Regions
    6. 32.5 Balance of Trade Concerns
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  34. 33 International Trade
    1. Introduction to International Trade
    2. 33.1 Absolute and Comparative Advantage
    3. 33.2 What Happens When a Country Has an Absolute Advantage in All Goods
    4. 33.3 Intra-industry Trade between Similar Economies
    5. 33.4 The Benefits of Reducing Barriers to International Trade
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  35. 34 Globalization and Protectionism
    1. Introduction to Globalization and Protectionism
    2. 34.1 Protectionism: An Indirect Subsidy from Consumers to Producers
    3. 34.2 International Trade and Its Effects on Jobs, Wages, and Working Conditions
    4. 34.3 Arguments in Support of Restricting Imports
    5. 34.4 How Governments Enact Trade Policy: Globally, Regionally, and Nationally
    6. 34.5 The Tradeoffs of Trade Policy
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  36. A | The Use of Mathematics in Principles of Economics
  37. B | Indifference Curves
  38. C | Present Discounted Value
  39. D | The Expenditure-Output Model
  40. Answer Key
    1. Chapter 1
    2. Chapter 2
    3. Chapter 3
    4. Chapter 4
    5. Chapter 5
    6. Chapter 6
    7. Chapter 7
    8. Chapter 8
    9. Chapter 9
    10. Chapter 10
    11. Chapter 11
    12. Chapter 12
    13. Chapter 13
    14. Chapter 14
    15. Chapter 15
    16. Chapter 16
    17. Chapter 17
    18. Chapter 18
    19. Chapter 19
    20. Chapter 20
    21. Chapter 21
    22. Chapter 22
    23. Chapter 23
    24. Chapter 24
    25. Chapter 25
    26. Chapter 26
    27. Chapter 27
    28. Chapter 28
    29. Chapter 29
    30. Chapter 30
    31. Chapter 31
    32. Chapter 32
    33. Chapter 33
    34. Chapter 34
  41. References
  42. Index

(This appendix should be consulted after first reading Welcome to Economics!) Economics is not math. There is no important concept in this course that cannot be explained without mathematics. That said, math is a tool that can be used to illustrate economic concepts. Remember the saying a picture is worth a thousand words? Instead of a picture, think of a graph. It is the same thing. Economists use models as the primary tool to derive insights about economic issues and problems. Math is one way of working with (or manipulating) economic models.

There are other ways of representing models, such as text or narrative. But why would you use your fist to bang a nail, if you had a hammer? Math has certain advantages over text. It disciplines your thinking by making you specify exactly what you mean. You can get away with fuzzy thinking in your head, but you cannot when you reduce a model to algebraic equations. At the same time, math also has disadvantages. Mathematical models are necessarily based on simplifying assumptions, so they are not likely to be perfectly realistic. Mathematical models also lack the nuances which can be found in narrative models. The point is that math is one tool, but it is not the only tool or even always the best tool economists can use. So what math will you need for this book? The answer is: little more than high school algebra and graphs. You will need to know:

  • What a function is
  • How to interpret the equation of a line (i.e., slope and intercept)
  • How to manipulate a line (i.e., changing the slope or the intercept)
  • How to compute and interpret a growth rate (i.e., percentage change)
  • How to read and manipulate a graph

In this text, we will use the easiest math possible, and we will introduce it in this appendix. So if you find some math in the book that you cannot follow, come back to this appendix to review. Like most things, math has diminishing returns. A little math ability goes a long way; the more advanced math you bring in, the less additional knowledge that will get you. That said, if you are going to major in economics, you should consider learning a little calculus. It will be worth your while in terms of helping you learn advanced economics more quickly.

Algebraic Models

Often economic models (or parts of models) are expressed in terms of mathematical functions. What is a function? A function describes a relationship. Sometimes the relationship is a definition. For example (using words), your professor is Adam Smith. This could be expressed as Professor = Adam Smith. Or Friends = Bob + Shawn + Margaret.

Often in economics, functions describe cause and effect. The variable on the left-hand side is what is being explained (“the effect”). On the right-hand side is what is doing the explaining (“the causes”). For example, suppose your GPA was determined as follows:

GPA = 0.25 Ă— combined_SAT + 0.25 Ă— class_attendance + 0.50 Ă— hours_spent_studyingGPA = 0.25 Ă— combined_SAT + 0.25 Ă— class_attendance + 0.50 Ă— hours_spent_studying

This equation states that your GPA depends on three things: your combined SAT score, your class attendance, and the number of hours you spend studying. It also says that study time is twice as important (0.50) as either combined_SAT score (0.25) or class_attendance (0.25). If this relationship is true, how could you raise your GPA? By not skipping class and studying more. Note that you cannot do anything about your SAT score, since if you are in college, you have (presumably) already taken the SATs.

Of course, economic models express relationships using economic variables, like Budget = money_spent_on_econ_books + money_spent_on_music, assuming that the only things you buy are economics books and music.

Most of the relationships we use in this course are expressed as linear equations of the form:

y = b + mxy = b + mx

Expressing Equations Graphically

Graphs are useful for two purposes. The first is to express equations visually, and the second is to display statistics or data. This section will discuss expressing equations visually.

To a mathematician or an economist, a variable is the name given to a quantity that may assume a range of values. In the equation of a line presented above, x and y are the variables, with x on the horizontal axis and y on the vertical axis, and b and m representing factors that determine the shape of the line. To see how this equation works, consider a numerical example:

y = 9 + 3xy = 9 + 3x

In this equation for a specific line, the b term has been set equal to 9 and the m term has been set equal to 3. Table A1 shows the values of x and y for this given equation. Figure A1 shows this equation, and these values, in a graph. To construct the table, just plug in a series of different values for x, and then calculate what value of y results. In the figure, these points are plotted and a line is drawn through them.

x y
0 9
1 12
2 15
3 18
4 21
5 24
6 27
Table A1 Values for the Slope Intercept Equation
the line graph shows the following approximate points: (0, 9); (1, 12); (2, 15); (3, 18); (4, 21); (5, 24); (6, 27).
Figure A1 Slope and the Algebra of Straight Lines This line graph has x on the horizontal axis and y on the vertical axis. The y-intercept—that is, the point where the line intersects the y-axis—is 9. The slope of the line is 3; that is, there is a rise of 3 on the vertical axis for every increase of 1 on the horizontal axis. The slope is the same all along a straight line.

This example illustrates how the b and m terms in an equation for a straight line determine the shape of the line. The b term is called the y-intercept. The reason for this name is that, if x = 0, then the b term will reveal where the line intercepts, or crosses, the y-axis. In this example, the line hits the vertical axis at 9. The m term in the equation for the line is the slope. Remember that slope is defined as rise over run; more specifically, the slope of a line from one point to another is the change in the vertical axis divided by the change in the horizontal axis. In this example, each time the x term increases by one (the run), the y term rises by three. Thus, the slope of this line is three. Specifying a y-intercept and a slope—that is, specifying b and m in the equation for a line—will identify a specific line. Although it is rare for real-world data points to arrange themselves as an exact straight line, it often turns out that a straight line can offer a reasonable approximation of actual data.

Interpreting the Slope

The concept of slope is very useful in economics, because it measures the relationship between two variables. A positive slope means that two variables are positively related; that is, when x increases, so does y, or when x decreases, y decreases also. Graphically, a positive slope means that as a line on the line graph moves from left to right, the line rises. The length-weight relationship, shown in Figure A3 later in this Appendix, has a positive slope. We will learn in other chapters that price and quantity supplied have a positive relationship; that is, firms will supply more when the price is higher.

A negative slope means that two variables are negatively related; that is, when x increases, y decreases, or when x decreases, y increases. Graphically, a negative slope means that, as the line on the line graph moves from left to right, the line falls. The altitude-air density relationship, shown in Figure A4 later in this appendix, has a negative slope. We will learn that price and quantity demanded have a negative relationship; that is, consumers will purchase less when the price is higher.

A slope of zero means that there is no relationship between x and y. Graphically, the line is flat; that is, zero rise over the run. Figure A5 of the unemployment rate, shown later in this appendix, illustrates a common pattern of many line graphs: some segments where the slope is positive, other segments where the slope is negative, and still other segments where the slope is close to zero.

The slope of a straight line between two points can be calculated in numerical terms. To calculate slope, begin by designating one point as the “starting point” and the other point as the “end point” and then calculating the rise over run between these two points. As an example, consider the slope of the air density graph between the points representing an altitude of 4,000 meters and an altitude of 6,000 meters:

Rise: Change in variable on vertical axis (end point minus original point)

 = 0.100 â€“ 0.307 = â€“0.207 = 0.100 â€“ 0.307 = â€“0.207

Run: Change in variable on horizontal axis (end point minus original point)

6,000 â€“ 4,0002,0006,000 â€“ 4,0002,000

Thus, the slope of a straight line between these two points would be that from the altitude of 4,000 meters up to 6,000 meters, the density of the air decreases by approximately 0.1 kilograms/cubic meter for each of the next 1,000 meters.

Suppose the slope of a line were to increase. Graphically, that means it would get steeper. Suppose the slope of a line were to decrease. Then it would get flatter. These conditions are true whether or not the slope was positive or negative to begin with. A higher positive slope means a steeper upward tilt to the line, while a smaller positive slope means a flatter upward tilt to the line. A negative slope that is larger in absolute value (that is, more negative) means a steeper downward tilt to the line. A slope of zero is a horizontal flat line. A vertical line has an infinite slope.

Suppose a line has a larger intercept. Graphically, that means it would shift out (or up) from the old origin, parallel to the old line. If a line has a smaller intercept, it would shift in (or down), parallel to the old line.

Solving Models with Algebra

Economists often use models to answer a specific question, like: What will the unemployment rate be if the economy grows at 3% per year? Answering specific questions requires solving the “system” of equations that represent the model.

Suppose the demand for personal pizzas is given by the following equation:

Qd = 16 â€“ 2PQd = 16 â€“ 2P

where Qd is the amount of personal pizzas consumers want to buy (i.e., quantity demanded), and P is the price of pizzas. Suppose the supply of personal pizzas is:

Qs = 2 + 5PQs = 2 + 5P

where Qs is the amount of pizza producers will supply (i.e., quantity supplied).

Finally, suppose that the personal pizza market operates where supply equals demand, or

Qd = QsQd = Qs

We now have a system of three equations and three unknowns (Qd, Qs, and P), which we can solve with algebra:

Since Qd = Qs, we can set the demand and supply equation equal to each other:

Qd = Qs16 â€“ 2P = 2 + 5PQd = Qs16 â€“ 2P = 2 + 5P

Subtracting 2 from both sides and adding 2P to both sides yields:

16 â€“ 2P â€“ 2 = 2 + 5P â€“ 214 â€“ 2P = 5P14 â€“ 2P + 2P = 5P + 2P14 = 7P147 = 7P72 = P16 â€“ 2P â€“ 2 = 2 + 5P â€“ 214 â€“ 2P = 5P14 â€“ 2P + 2P = 5P + 2P14 = 7P147 = 7P72 = P

In other words, the price of each personal pizza will be $2. How much will consumers buy?

Taking the price of $2, and plugging it into the demand equation, we get:

Qd = 16 â€“ 2P = 16 â€“ 2(2) = 16 â€“ 4 = 12Qd = 16 â€“ 2P = 16 â€“ 2(2) = 16 â€“ 4 = 12

So if the price is $2 each, consumers will purchase 12. How much will producers supply? Taking the price of $2, and plugging it into the supply equation, we get:

Qs = 2 + 5P = 2 + 5(2) = 2 + 10 = 12Qs = 2 + 5P = 2 + 5(2) = 2 + 10 = 12

So if the price is $2 each, producers will supply 12 personal pizzas. This means we did our math correctly, since Qd = Qs.

Solving Models with Graphs

If algebra is not your forte, you can get the same answer by using graphs. Take the equations for Qd and Qs and graph them on the same set of axes as shown in Figure A2. Since P is on the vertical axis, it is easiest if you solve each equation for P. The demand curve is then P = 8 – 0.5Qd and the supply curve is P = –0.4 + 0.2Qs. Note that the vertical intercepts are 8 and –0.4, and the slopes are –0.5 for demand and 0.2 for supply. If you draw the graphs carefully, you will see that where they cross (Qs = Qd), the price is $2 and the quantity is 12, just like the algebra predicted.

The graph shows a downward sloping demand curve with endpoints (0, 8) and (16, 0), and an upward sloping supply curve. The demand curve and supply curve intersect at point (12, 2).
Figure A2 Supply and Demand Graph The equations for Qd and Qs are displayed graphically by the sloped lines.

We will use graphs more frequently in this book than algebra, but now you know the math behind the graphs.

Growth Rates

Growth rates are frequently encountered in real world economics. A growth rate is simply the percentage change in some quantity. It could be your income. It could be a business’s sales. It could be a nation’s GDP. The formula for computing a growth rate is straightforward:

Percentage change = Change in quantityQuantityPercentage change = Change in quantityQuantity

Suppose your job pays $10 per hour. Your boss, however, is so impressed with your work that he gives you a $2 per hour raise. The percentage change (or growth rate) in your pay is $2/$10 = 0.20 or 20%.

To compute the growth rate for data over an extended period of time, for example, the average annual growth in GDP over a decade or more, the denominator is commonly defined a little differently. In the previous example, we defined the quantity as the initial quantity—or the quantity when we started. This is fine for a one-time calculation, but when we compute the growth over and over, it makes more sense to define the quantity as the average quantity over the period in question, which is defined as the quantity halfway between the initial quantity and the next quantity. This is harder to explain in words than to show with an example. Suppose a nation’s GDP was $1 trillion in 2005 and $1.03 trillion in 2006. The growth rate between 2005 and 2006 would be the change in GDP ($1.03 trillion – $1.00 trillion) divided by the average GDP between 2005 and 2006 ($1.03 trillion + $1.00 trillion)/2. In other words:

 = $1.03 trillion â€“ $1.00 trillion($1.03 trillion + $1.00 trillion) / 2 = 0.031.015 = 0.0296 = 2.96% growth = $1.03 trillion â€“ $1.00 trillion($1.03 trillion + $1.00 trillion) / 2 = 0.031.015 = 0.0296 = 2.96% growth

Note that if we used the first method, the calculation would be ($1.03 trillion – $1.00 trillion) / $1.00 trillion = 3% growth, which is approximately the same as the second, more complicated method. If you need a rough approximation, use the first method. If you need accuracy, use the second method.

A few things to remember: A positive growth rate means the quantity is growing. A smaller growth rate means the quantity is growing more slowly. A larger growth rate means the quantity is growing more quickly. A negative growth rate means the quantity is decreasing.

The same change over times yields a smaller growth rate. If you got a $2 raise each year, in the first year the growth rate would be $2/$10 = 20%, as shown above. But in the second year, the growth rate would be $2/$12 = 0.167 or 16.7% growth. In the third year, the same $2 raise would correspond to a $2/$14 = 14.2%. The moral of the story is this: To keep the growth rate the same, the change must increase each period.

Displaying Data Graphically and Interpreting the Graph

Graphs are also used to display data or evidence. Graphs are a method of presenting numerical patterns. They condense detailed numerical information into a visual form in which relationships and numerical patterns can be seen more easily. For example, which countries have larger or smaller populations? A careful reader could examine a long list of numbers representing the populations of many countries, but with over 200 nations in the world, searching through such a list would take concentration and time. Putting these same numbers on a graph can quickly reveal population patterns. Economists use graphs both for a compact and readable presentation of groups of numbers and for building an intuitive grasp of relationships and connections.

Three types of graphs are used in this book: line graphs, pie graphs, and bar graphs. Each is discussed below. We also provide warnings about how graphs can be manipulated to alter viewers’ perceptions of the relationships in the data.

Line Graphs

The graphs we have discussed so far are called line graphs, because they show a relationship between two variables: one measured on the horizontal axis and the other measured on the vertical axis.

Sometimes it is useful to show more than one set of data on the same axes. The data in Table A2 is displayed in Figure A3 which shows the relationship between two variables: length and median weight for American baby boys and girls during the first three years of life. (The median means that half of all babies weigh more than this and half weigh less.) The line graph measures length in inches on the horizontal axis and weight in pounds on the vertical axis. For example, point A on the figure shows that a boy who is 28 inches long will have a median weight of about 19 pounds. One line on the graph shows the length-weight relationship for boys and the other line shows the relationship for girls. This kind of graph is widely used by healthcare providers to check whether a child’s physical development is roughly on track.

The graph shows length (inches) along the x-axis and weight (pounds) along the y-axis. The following points reflect the length-weight ratio of American boys: (20, 8.0), (22, 10.5), (24, 13.5), (26, 16.4), (28, 19), (30, 21.8), (32, 24.3), (34, 27), (36, 9.3), (38, 32). The following points reflect the length-weight ratio of American girls: (20, 7.9), (22, 10.5), (24, 13.2), (26, 16), (28, 18.8), (30, 21.2), (32, 24), (34, 26.2), (36, 28.9), (38, 31.3).
Figure A3 The Length-Weight Relationship for American Boys and Girls The line graph shows the relationship between height and weight for boys and girls from birth to 3 years. Point A, for example, shows that a boy of 28 inches in height (measured on the horizontal axis) is typically 19 pounds in weight (measured on the vertical axis). These data apply only to children in the first three years of life.
Boys from Birth to 36 Months Girls from Birth to 36 Months
Length (inches) Weight (pounds) Length (inches) Weight (pounds)
20.0 8.0 20.0 7.9
22.0 10.5 22.0 10.5
24.0 13.5 24.0 13.2
26.0 16.4 26.0 16.0
28.0 19.0 28.0 18.8
30.0 21.8 30.0 21.2
32.0 24.3 32.0 24.0
34.0 27.0 34.0 26.2
36.0 29.3 36.0 28.9
38.0 32.0 38.0 31.3
Table A2 Length to Weight Relationship for American Boys and Girls

Not all relationships in economics are linear. Sometimes they are curves. Figure A4 presents another example of a line graph, representing the data from Table A3. In this case, the line graph shows how thin the air becomes when you climb a mountain. The horizontal axis of the figure shows altitude, measured in meters above sea level. The vertical axis measures the density of the air at each altitude. Air density is measured by the weight of the air in a cubic meter of space (that is, a box measuring one meter in height, width, and depth). As the graph shows, air pressure is heaviest at ground level and becomes lighter as you climb. Figure A4 shows that a cubic meter of air at an altitude of 500 meters weighs approximately one kilogram (about 2.2 pounds). However, as the altitude increases, air density decreases. A cubic meter of air at the top of Mount Everest, at about 8,828 meters, would weigh only 0.023 kilograms. The thin air at high altitudes explains why many mountain climbers need to use oxygen tanks as they reach the top of a mountain.

The graph shows altitude on the x-axis and air density on the y-axis. A downward sloping lines has the end points (0, 1.2) and (8.828, 0.023). End point (8,828, 0.023) represents the top of Mount Everest.
Figure A4 Altitude-Air Density Relationship This line graph shows the relationship between altitude, measured in meters above sea level, and air density, measured in kilograms of air per cubic meter. As altitude rises, air density declines. The point at the top of Mount Everest has an altitude of approximately 8,828 meters above sea level (the horizontal axis) and air density of 0.023 kilograms per cubic meter (the vertical axis).
Altitude (meters) Air Density (kg/cubic meters)
0 1.200
500 1.093
1,000 0.831
1,500 0.678
2,000 0.569
2,500 0.484
3,000 0.415
3,500 0.357
4,000 0.307
4,500 0.231
5,000 0.182
5,500 0.142
6,000 0.100
6,500 0.085
7,000 0.066
7,500 0.051
8,000 0.041
8,500 0.025
9,000 0.022
9,500 0.019
10,000 0.014
Table A3 Altitude to Air Density Relationship

The length-weight relationship and the altitude-air density relationships in these two figures represent averages. If you were to collect actual data on air pressure at different altitudes, the same altitude in different geographic locations will have slightly different air density, depending on factors like how far you are from the equator, local weather conditions, and the humidity in the air. Similarly, in measuring the height and weight of children for the previous line graph, children of a particular height would have a range of different weights, some above average and some below. In the real world, this sort of variation in data is common. The task of a researcher is to organize that data in a way that helps to understand typical patterns. The study of statistics, especially when combined with computer statistics and spreadsheet programs, is a great help in organizing this kind of data, plotting line graphs, and looking for typical underlying relationships. For most economics and social science majors, a statistics course will be required at some point.

One common line graph is called a time series, in which the horizontal axis shows time and the vertical axis displays another variable. Thus, a time series graph shows how a variable changes over time. Figure A5 shows the unemployment rate in the United States since 1975, where unemployment is defined as the percentage of adults who want jobs and are looking for a job, but cannot find one. The points for the unemployment rate in each year are plotted on the graph, and a line then connects the points, showing how the unemployment rate has moved up and down since 1975. The line graph makes it easy to see, for example, that the highest unemployment rate during this time period was slightly less than 10% in the early 1980s and 2010, while the unemployment rate declined from the early 1990s to the end of the 1990s, before rising and then falling back in the early 2000s, and then rising sharply during the recession from 2008–2009.

The graph shows unemployment rates since 1970. The highest rates occurred around 1983 and 2010.
Figure A5 U.S. Unemployment Rate, 1975–2014 This graph provides a quick visual summary of unemployment data. With a graph like this, it is easy to spot the times of high unemployment and of low unemployment.

Pie Graphs

A pie graph (sometimes called a pie chart) is used to show how an overall total is divided into parts. A circle represents a group as a whole. The slices of this circular “pie” show the relative sizes of subgroups.

Figure A6 shows how the U.S. population was divided among children, working age adults, and the elderly in 1970, 2000, and what is projected for 2030. The information is first conveyed with numbers in Table A4, and then in three pie charts. The first column of Table A4 shows the total U.S. population for each of the three years. Columns 2–4 categorize the total in terms of age groups—from birth to 18 years, from 19 to 64 years, and 65 years and above. In columns 2–4, the first number shows the actual number of people in each age category, while the number in parentheses shows the percentage of the total population comprised by that age group.

Year Total Population 19 and Under 20–64 years Over 65
1970 205.0 million 77.2 (37.6%) 107.7 (52.5%) 20.1 (9.8%)
2000 275.4 million 78.4 (28.5%) 162.2 (58.9%) 34.8 (12.6%)
2030 351.1 million 92.6 (26.4%) 188.2 (53.6%) 70.3 (20.0%)
Table A4 U.S. Age Distribution, 1970, 2000, and 2030 (projected)
The image shows three pie graphs representing age distribution in the U.S. Image (a) shows that in 1970, people 19 and under made up 77.2 million or 37.6% of the population; people between ages 20 and 64 made up 107.7 million or 52.5% of the population; and people 65 or older made up 20.1 million or 9.8% of the population. Image (b) shows that in 2000, people 19 and under made up 78.4 million or 28.5% of the population; people between ages 20 and 64 made up 162.2 million or 58.9% of the population; and people 65 or older made up 34.8 million or 12.6% of the population. Image (c) projects that in 2030, people 19 and under will make up 92.6 million or 26.4% of the population; people between ages 20 and 64 made up 188.2 million or 53.6% of the population; and people 65 or older made up 70.3 million or 20% of the population.
Figure A6 Pie Graphs of the U.S. Age Distribution (numbers in millions) The three pie graphs illustrate the division of total population into three age groups for the three different years.

In a pie graph, each slice of the pie represents a share of the total, or a percentage. For example, 50% would be half of the pie and 20% would be one-fifth of the pie. The three pie graphs in Figure A6 show that the share of the U.S. population 65 and over is growing. The pie graphs allow you to get a feel for the relative size of the different age groups from 1970 to 2000 to 2030, without requiring you to slog through the specific numbers and percentages in the table. Some common examples of how pie graphs are used include dividing the population into groups by age, income level, ethnicity, religion, occupation; dividing different firms into categories by size, industry, number of employees; and dividing up government spending or taxes into its main categories.

Bar Graphs

A bar graph uses the height of different bars to compare quantities. Table A5 lists the 12 most populous countries in the world. Figure A7 provides this same data in a bar graph. The height of the bars corresponds to the population of each country. Although you may know that China and India are the most populous countries in the world, seeing how the bars on the graph tower over the other countries helps illustrate the magnitude of the difference between the sizes of national populations.

The bar graph shows population (millions) on the y-axis and lists various countries along the x-axis. The approximate population in 2015 for each of these countries is as follows: China = 1,369; India = 1,270; Unite States = 321, Indonesia = 255; Brazil = 204; Pakistan = 190; Bangladesh = 158; Russia = 146; Japan = 127; Mexico = 121; Philippines = 101.
Figure A7 Leading Countries of the World by Population, 2015 (in millions) The graph shows the 12 countries of the world with the largest populations. The height of the bars in the bar graph shows the size of the population for each country.
Country Population
China 1,369
India 1,270
United States 321
Indonesia 255
Brazil 204
Pakistan 190
Nigeria 184
Bangladesh 158
Russia 146
Japan 127
Mexico 121
Philippines 101
Table A5 Leading 12 Countries of the World by Population

Bar graphs can be subdivided in a way that reveals information similar to that we can get from pie charts. Figure A8 offers three bar graphs based on the information from Figure A6 about the U.S. age distribution in 1970, 2000, and 2030. Figure A8 (a) shows three bars for each year, representing the total number of persons in each age bracket for each year. Figure A8 (b) shows just one bar for each year, but the different age groups are now shaded inside the bar. In Figure A8 (c), still based on the same data, the vertical axis measures percentages rather than the number of persons. In this case, all three bar graphs are the same height, representing 100% of the population, with each bar divided according to the percentage of population in each age group. It is sometimes easier for a reader to run his or her eyes across several bar graphs, comparing the shaded areas, rather than trying to compare several pie graphs.

The image shows three bar graphs that represent the U.S. population. All three images reveal the same information presented in different ways. In 1970, people 19 and under made up 77.2 million or 37.6% of the population; people between ages 20 and 64 made up 107.7 million or 52.5% of the population; and people 65 or older made up 20.1 million or 9.8% of the population. In 2000, people 19 and under made up 78.4 million or 28.5% of the population; people between ages 20 and 64 made up 162.2 million or 58.9% of the population; and people 65 or older made up 34.8 million or 12.6% of the population. In 2030, the projection is that people 19 and under will make up 92.6 million or 26.4% of the population; people between ages 20 and 64 made up 188.2 million or 53.6% of the population; and people 65 or older made up 70.3 million or 20% of the population. Image (a) shows separate bar graphs for each age group in each time period (so 9 bars total). Image (b) shows the total population divided into age groups (so 3 bars total, with different color coding to identify the portions pertaining to different ages). Image (c) shows the total population divided into percentages to reveal the prediction that in 2030 (so 3 bars total, with different color coding to identify the portions pertaining to different ages).
Figure A8 U.S. Population with Bar Graphs Population data can be represented in different ways. (a) Shows three bars for each year, representing the total number of persons in each age bracket for each year. (b) Shows just one bar for each year, but the different age groups are now shaded inside the bar. (c) Sets the vertical axis as a measure of percentages rather than the number of persons. All three bar graphs are the same height and each bar is divided according to the percentage of population in each age group.

Figure A7 and Figure A8 show how the bars can represent countries or years, and how the vertical axis can represent a numerical or a percentage value. Bar graphs can also compare size, quantity, rates, distances, and other quantitative categories.

Comparing Line Graphs with Pie Charts and Bar Graphs

Now that you are familiar with pie graphs, bar graphs, and line graphs, how do you know which graph to use for your data? Pie graphs are often better than line graphs at showing how an overall group is divided. However, if a pie graph has too many slices, it can become difficult to interpret.

Bar graphs are especially useful when comparing quantities. For example, if you are studying the populations of different countries, as in Figure A7, bar graphs can show the relationships between the population sizes of multiple countries. Not only can it show these relationships, but it can also show breakdowns of different groups within the population.

A line graph is often the most effective format for illustrating a relationship between two variables that are both changing. For example, time series graphs can show patterns as time changes, like the unemployment rate over time. Line graphs are widely used in economics to present continuous data about prices, wages, quantities bought and sold, the size of the economy.

How Graphs Can Be Misleading

Graphs not only reveal patterns; they can also alter how patterns are perceived. To see some of the ways this can be done, consider the line graphs of Figure A9, Figure A10, and Figure A11. These graphs all illustrate the unemployment rate—but from different perspectives.

All three graphs present the exact same data but in different ways that may alter how the data is interpreted. Image (a) shows the unemployment rate wide and short. Image (b) shows the unemployment rate narrow and tall. Image (c) shows the unemployment rate, with wider range of numbers on the vertical axis.
Figure A9
Image (f) shows the unemployment rate monthly data.
Figure A10 Presenting Unemployment Rates in Different Ways, All of Them Accurate Simply changing the width and height of the area in which data is displayed can alter the perception of the data.
Image (f) shows the unemployment rate since 1975 only.
Figure A11 Presenting Unemployment Rates in Different Ways, All of Them Accurate Simply changing the width and height of the area in which data is displayed can alter the perception of the data.

Suppose you wanted a graph which gives the impression that the rise in unemployment in 2009 was not all that large, or all that extraordinary by historical standards. You might choose to present your data as in Figure A9 (a). Figure A9 (a) includes much of the same data presented earlier in Figure A5, but stretches the horizontal axis out longer relative to the vertical axis. By spreading the graph wide and flat, the visual appearance is that the rise in unemployment is not so large, and is similar to some past rises in unemployment. Now imagine you wanted to emphasize how unemployment spiked substantially higher in 2009. In this case, using the same data, you can stretch the vertical axis out relative to the horizontal axis, as in Figure A9 (b), which makes all rises and falls in unemployment appear larger.

A similar effect can be accomplished without changing the length of the axes, but by changing the scale on the vertical axis. In Figure A10 (c), the scale on the vertical axis runs from 0% to 30%, while in Figure A10 (d), the vertical axis runs from 3% to 10%. Compared to Figure A5, where the vertical scale runs from 0% to 12%, Figure A10 (c) makes the fluctuation in unemployment look smaller, while Figure A10 (d) makes it look larger.

Another way to alter the perception of the graph is to reduce the amount of variation by changing the number of points plotted on the graph. Figure A10 (e) shows the unemployment rate according to five-year averages. By averaging out some of the year-to-year changes, the line appears smoother and with fewer highs and lows. In reality, the unemployment rate is reported monthly, and Figure A11 (f) shows the monthly figures since 1960, which fluctuate more than the five-year average. Figure A11 (f) is also a vivid illustration of how graphs can compress lots of data. The graph includes monthly data since 1960, which over almost 50 years, works out to nearly 600 data points. Reading that list of 600 data points in numerical form would be hypnotic. You can, however, get a good intuitive sense of these 600 data points very quickly from the graph.

A final trick in manipulating the perception of graphical information is that, by choosing the starting and ending points carefully, you can influence the perception of whether the variable is rising or falling. The original data show a general pattern with unemployment low in the 1960s, but spiking up in the mid-1970s, early 1980s, early 1990s, early 2000s, and late 2000s. Figure A11 (g), however, shows a graph that goes back only to 1975, which gives an impression that unemployment was more-or-less gradually falling over time until the 2009 recession pushed it back up to its “original” level—which is a plausible interpretation if one starts at the high point around 1975.

These kinds of tricks—or shall we just call them “presentation choices”— are not limited to line graphs. In a pie chart with many small slices and one large slice, someone must decide what categories should be used to produce these slices in the first place, thus making some slices appear bigger than others. If you are making a bar graph, you can make the vertical axis either taller or shorter, which will tend to make variations in the height of the bars appear more or less.

Being able to read graphs is an essential skill, both in economics and in life. A graph is just one perspective or point of view, shaped by choices such as those discussed in this section. Do not always believe the first quick impression from a graph. View with caution.

Key Concepts and Summary

Math is a tool for understanding economics and economic relationships can be expressed mathematically using algebra or graphs. The algebraic equation for a line is y = b + mx, where x is the variable on the horizontal axis and y is the variable on the vertical axis, the b term is the y-intercept and the m term is the slope. The slope of a line is the same at any point on the line and it indicates the relationship (positive, negative, or zero) between two economic variables.

Economic models can be solved algebraically or graphically. Graphs allow you to illustrate data visually. They can illustrate patterns, comparisons, trends, and apportionment by condensing the numerical data and providing an intuitive sense of relationships in the data. A line graph shows the relationship between two variables: one is shown on the horizontal axis and one on the vertical axis. A pie graph shows how something is allotted, such as a sum of money or a group of people. The size of each slice of the pie is drawn to represent the corresponding percentage of the whole. A bar graph uses the height of bars to show a relationship, where each bar represents a certain entity, like a country or a group of people. The bars on a bar graph can also be divided into segments to show subgroups.

Any graph is a single visual perspective on a subject. The impression it leaves will be based on many choices, such as what data or time frame is included, how data or groups are divided up, the relative size of vertical and horizontal axes, whether the scale used on a vertical starts at zero. Thus, any graph should be regarded somewhat skeptically, remembering that the underlying relationship can be open to different interpretations.

Review Questions

Exercise A1

Name three kinds of graphs and briefly state when is most appropriate to use each type of graph.

Exercise A2

What is slope on a line graph?

Exercise A3

What do the slices of a pie chart represent?

Exercise A4

Why is a bar chart the best way to illustrate comparisons?

Exercise A5

How does the appearance of positive slope differ from negative slope and from zero slope?

Order a print copy

As an Amazon Associate we earn from qualifying purchases.

Citation/Attribution

Want to cite, share, or modify this book? This book uses the Creative Commons Attribution License and you must attribute OpenStax.

Attribution information
  • If you are redistributing all or part of this book in a print format, then you must include on every physical page the following attribution:
    Access for free at https://openstax.org/books/principles-economics-2e/pages/1-introduction
  • If you are redistributing all or part of this book in a digital format, then you must include on every digital page view the following attribution:
    Access for free at https://openstax.org/books/principles-economics-2e/pages/1-introduction
Citation information

© Jun 15, 2022 OpenStax. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution License . The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.