Skip to ContentGo to accessibility pageKeyboard shortcuts menu
OpenStax Logo
Introductory Statistics

2.7 Measures of the Spread of the Data

Introductory Statistics2.7 Measures of the Spread of the Data

An important characteristic of any set of data is the variation in the data. In some data sets, the data values are concentrated closely near the mean; in other data sets, the data values are more widely spread out from the mean. The most common measure of variation, or spread, is the standard deviation. The standard deviation is a number that measures how far data values are from their mean.

The standard deviation

  • provides a numerical measure of the overall amount of variation in a data set, and
  • can be used to determine whether a particular data value is close to or far from the mean.

The standard deviation provides a measure of the overall variation in a data set

The standard deviation is always positive or zero. The standard deviation is small when the data are all concentrated close to the mean, exhibiting little variation or spread. The standard deviation is larger when the data values are more spread out from the mean, exhibiting more variation.

Suppose that we are studying the amount of time customers wait in line at the checkout at supermarket A and supermarket B. the average wait time at both supermarkets is five minutes. At supermarket A, the standard deviation for the wait time is two minutes; at supermarket B the standard deviation for the wait time is four minutes.

Because supermarket B has a higher standard deviation, we know that there is more variation in the wait times at supermarket B. Overall, wait times at supermarket B are more spread out from the average; wait times at supermarket A are more concentrated near the average.

The standard deviation can be used to determine whether a data value is close to or far from the mean.

Suppose that Rosa and Binh both shop at supermarket A. Rosa waits at the checkout counter for seven minutes and Binh waits for one minute. At supermarket A, the mean waiting time is five minutes and the standard deviation is two minutes. The standard deviation can be used to determine whether a data value is close to or far from the mean.

Rosa waits for seven minutes:

  • Seven is two minutes longer than the average of five; two minutes is equal to one standard deviation.
  • Rosa's wait time of seven minutes is two minutes longer than the average of five minutes.
  • Rosa's wait time of seven minutes is one standard deviation above the average of five minutes.

Binh waits for one minute.

  • One is four minutes less than the average of five; four minutes is equal to two standard deviations.
  • Binh's wait time of one minute is four minutes less than the average of five minutes.
  • Binh's wait time of one minute is two standard deviations below the average of five minutes.
  • A data value that is two standard deviations from the average is just on the borderline for what many statisticians would consider to be far from the average. Considering data to be far from the mean if it is more than two standard deviations away is more of an approximate "rule of thumb" than a rigid rule. In general, the shape of the distribution of the data affects how much of the data is further away than two standard deviations. (You will learn more about this in later chapters.)

The number line may help you understand standard deviation. If we were to put five and seven on a number line, seven is to the right of five. We say, then, that seven is one standard deviation to the right of five because 5 + (1)(2) = 7.

If one were also part of the data set, then one is two standard deviations to the left of five because 5 + (–2)(2) = 1.

This shows a number line in intervals of 1 from 0 to 7.
Figure 2.24
  • In general, a value = mean + (#ofSTDEV)(standard deviation)
  • where #ofSTDEVs = the number of standard deviations
  • #ofSTDEV does not need to be an integer
  • One is two standard deviations less than the mean of five because: 1 = 5 + (–2)(2).

The equation value = mean + (#ofSTDEVs)(standard deviation) can be expressed for a sample and for a population.

  • sample: x =  x ¯  + (#ofSTDEV)(s) x =  x ¯  + (#ofSTDEV)(s)
  • Population: x=μ+(#ofSTDEV)(σ) x=μ+(#ofSTDEV)(σ)

The lower case letter s represents the sample standard deviation and the Greek letter σ (sigma, lower case) represents the population standard deviation.

The symbol x¯x¯ is the sample mean and the Greek symbol μμ is the population mean.

Calculating the Standard Deviation

If x is a number, then the difference "x – mean" is called its deviation. In a data set, there are as many deviations as there are items in the data set. The deviations are used to calculate the standard deviation. If the numbers belong to a population, in symbols a deviation is xμ. For sample data, in symbols a deviation is x x ¯ x ¯ .

The procedure to calculate the standard deviation depends on whether the numbers are the entire population or are data from a sample. The calculations are similar, but not identical. Therefore the symbol used to represent the standard deviation depends on whether it is calculated from a population or a sample. The lower case letter s represents the sample standard deviation and the Greek letter σ (sigma, lower case) represents the population standard deviation. If the sample has the same characteristics as the population, then s should be a good estimate of σ.

To calculate the standard deviation, we need to calculate the variance first. The variance is the average of the squares of the deviations (the x x ¯ x ¯ values for a sample, or the xμ values for a population). The symbol σ2 represents the population variance; the population standard deviation σ is the square root of the population variance. The symbol s2 represents the sample variance; the sample standard deviation s is the square root of the sample variance. You can think of the standard deviation as a special average of the deviations.

If the numbers come from a census of the entire population and not a sample, when we calculate the average of the squared deviations to find the variance, we divide by N, the number of items in the population. If the data are from a sample rather than a population, when we calculate the average of the squared deviations, we divide by n – 1, one less than the number of items in the sample.

Formulas for the Sample Standard Deviation

  • s= Σ (x x ¯ ) 2 n1 s= Σ (x x ¯ ) 2 n1 or s= Σf (x x ¯ ) 2 n1 s= Σf (x x ¯ ) 2 n1
  • For the sample standard deviation, the denominator is n - 1, that is the sample size MINUS 1.

Formulas for the Population Standard Deviation

  • σ  =  Σ (xμ) 2 N σ  =  Σ (xμ) 2 N or σ  =  Σf (xμ) 2 N σ  =  Σf (xμ) 2 N
  • For the population standard deviation, the denominator is N, the number of items in the population.

In these formulas, f represents the frequency with which a value appears. For example, if a value appears once, f is one. If a value appears three times in the data set or population, f is three.

Sampling Variability of a Statistic

The statistic of a sampling distribution was discussed in Descriptive Statistics: Measuring the Center of the Data. How much the statistic varies from one sample to another is known as the sampling variability of a statistic. You typically measure the sampling variability of a statistic by its standard error. The standard error of the mean is an example of a standard error. It is a special standard deviation and is known as the standard deviation of the sampling distribution of the mean. You will cover the standard error of the mean in the chapter The Central Limit Theorem (not now). The notation for the standard error of the mean is σ n σ n where σ is the standard deviation of the population and n is the size of the sample.

NOTE

In practice, USE A CALCULATOR OR COMPUTER SOFTWARE TO CALCULATE THE STANDARD DEVIATION. If you are using a TI-83, 83+, 84+ calculator, you need to select the appropriate standard deviation σx or sx from the summary statistics. We will concentrate on using and interpreting the information that the standard deviation gives us. However you should study the following step-by-step example to help you understand how the standard deviation measures variation from the mean. (The calculator instructions appear at the end of this example.)

Example 2.32

In a fifth grade class, the teacher was interested in the average age and the sample standard deviation of the ages of her students. The following data are the ages for a SAMPLE of n = 20 fifth grade students. The ages are rounded to the nearest half year:

9; 9.5; 9.5; 10; 10; 10; 10; 10.5; 10.5; 10.5; 10.5; 11; 11; 11; 11; 11; 11; 11.5; 11.5; 11.5;

x ¯ = 9 + 9.5(2) + 10(4) + 10.5(4) + 11(6) + 11.5(3) 20 =10.525 x ¯ = 9 + 9.5(2) + 10(4) + 10.5(4) + 11(6) + 11.5(3) 20 =10.525

The average age is 10.53 years, rounded to two places.

The variance may be calculated by using a table. Then the standard deviation is calculated by taking the square root of the variance. We will explain the parts of the table after calculating s.

Data Freq. Deviations Deviations2 (Freq.)(Deviations2)
x f (x x ¯ x ¯ ) (x x ¯ x ¯ )2 (f)(x x ¯ x ¯ )2
9 1 9 – 10.525 = –1.525 (–1.525)2 = 2.325625 1 × 2.325625 = 2.325625
9.5 2 9.5 – 10.525 = –1.025 (–1.025)2 = 1.050625 2 × 1.050625 = 2.101250
10 4 10 – 10.525 = –0.525 (–0.525)2 = 0.275625 4 × 0.275625 = 1.1025
10.5 4 10.5 – 10.525 = –0.025 (–0.025)2 = 0.000625 4 × 0.000625 = 0.0025
11 6 11 – 10.525 = 0.475 (0.475)2 = 0.225625 6 × 0.225625 = 1.35375
11.5 3 11.5 – 10.525 = 0.975 (0.975)2 = 0.950625 3 × 0.950625 = 2.851875
The total is 9.7375
Table 2.29

The sample variance, s2, is equal to the sum of the last column (9.7375) divided by the total number of data values minus one (20 – 1):

s 2 = 9.7375 201 =0.5125 s 2 = 9.7375 201 =0.5125

The sample standard deviation s is equal to the square root of the sample variance:

s= 0.5125 =0.715891, s= 0.5125 =0.715891, which is rounded to two decimal places, s = 0.72.

Typically, you do the calculation for the standard deviation on your calculator or computer. The intermediate results are not rounded. This is done for accuracy.

Problem

  • For the following problems, recall that value = mean + (#ofSTDEVs)(standard deviation). Verify the mean and standard deviation or a calculator or computer.
  • For a sample: x = x ¯ x ¯ + (#ofSTDEVs)(s)
  • For a population: x = μ + (#ofSTDEVs)(σ)
  • For this example, use x = x ¯ x ¯ + (#ofSTDEVs)(s) because the data is from a sample
  1. Verify the mean and standard deviation on your calculator or computer.
  2. Find the value that is one standard deviation above the mean. Find ( x ¯ x ¯ + 1s).
  3. Find the value that is two standard deviations below the mean. Find ( x ¯ x ¯ – 2s).
  4. Find the values that are 1.5 standard deviations from (below and above) the mean.

Try It 2.32

On a baseball team, the ages of each of the players are as follows:

21; 21; 22; 23; 24; 24; 25; 25; 28; 29; 29; 31; 32; 33; 33; 34; 35; 36; 36; 36; 36; 38; 38; 38; 40


Use your calculator or computer to find the mean and standard deviation. Then find the value that is two standard deviations above the mean.

Explanation of the standard deviation calculation shown in the table

The deviations show how spread out the data are about the mean. The data value 11.5 is farther from the mean than is the data value 11 which is indicated by the deviations 0.97 and 0.47. A positive deviation occurs when the data value is greater than the mean, whereas a negative deviation occurs when the data value is less than the mean. The deviation is –1.525 for the data value nine. If you add the deviations, the sum is always zero. (For Example 2.32, there are n = 20 deviations.) So you cannot simply add the deviations to get the spread of the data. By squaring the deviations, you make them positive numbers, and the sum will also be positive. The variance, then, is the average squared deviation.

The variance is a squared measure and does not have the same units as the data. Taking the square root solves the problem. The standard deviation measures the spread in the same units as the data.

Notice that instead of dividing by n = 20, the calculation divided by n – 1 = 20 – 1 = 19 because the data is a sample. For the sample variance, we divide by the sample size minus one (n – 1). Why not divide by n? The answer has to do with the population variance. The sample variance is an estimate of the population variance. Based on the theoretical mathematics that lies behind these calculations, dividing by (n – 1) gives a better estimate of the population variance.

NOTE

Your concentration should be on what the standard deviation tells us about the data. The standard deviation is a number which measures how far the data are spread from the mean. Let a calculator or computer do the arithmetic.

The standard deviation, s or σ, is either zero or larger than zero. Describing the data with reference to the spread is called "variability". The variability in data depends upon the method by which the outcomes are obtained; for example, by measuring or by random sampling. When the standard deviation is zero, there is no spread; that is, the all the data values are equal to each other. The standard deviation is small when the data are all concentrated close to the mean, and is larger when the data values show more variation from the mean. When the standard deviation is a lot larger than zero, the data values are very spread out about the mean; outliers can make s or σ very large.

The standard deviation, when first presented, can seem unclear. By graphing your data, you can get a better "feel" for the deviations and the standard deviation. You will find that in symmetrical distributions, the standard deviation can be very helpful but in skewed distributions, the standard deviation may not be much help. The reason is that the two sides of a skewed distribution have different spreads. In a skewed distribution, it is better to look at the first quartile, the median, the third quartile, the smallest value, and the largest value. Because numbers can be confusing, always graph your data. Display your data in a histogram or a box plot.

Example 2.33

Problem

Use the following data (first exam scores) from Susan Dean's spring pre-calculus class:

33; 42; 49; 49; 53; 55; 55; 61; 63; 67; 68; 68; 69; 69; 72; 73; 74; 78; 80; 83; 88; 88; 88; 90; 92; 94; 94; 94; 94; 96; 100

  1. Create a chart containing the data, frequencies, relative frequencies, and cumulative relative frequencies to three decimal places.
  2. Calculate the following to one decimal place using a TI-83+ or TI-84 calculator:
    1. The sample mean
    2. The sample standard deviation
    3. The median
    4. The first quartile
    5. The third quartile
    6. IQR
  3. Construct a box plot and a histogram on the same set of axes. Make comments about the box plot, the histogram, and the chart.

The long left whisker in the box plot is reflected in the left side of the histogram. The spread of the exam scores in the lower 50% is greater (73 – 33 = 40) than the spread in the upper 50% (100 – 73 = 27). The histogram, box plot, and chart all reflect this. There are a substantial number of A and B grades (80s, 90s, and 100). The histogram clearly shows this. The box plot shows us that the middle 50% of the exam scores (IQR = 29) are Ds, Cs, and Bs. The box plot also shows us that the lower 25% of the exam scores are Ds and Fs.

Try It 2.33

The following data show the different types of pet food stores in the area carry.
6; 6; 6; 6; 7; 7; 7; 7; 7; 8; 9; 9; 9; 9; 10; 10; 10; 10; 10; 11; 11; 11; 11; 12; 12; 12; 12; 12; 12;
Calculate the sample mean and the sample standard deviation to one decimal place using a TI-83+ or TI-84 calculator.

Standard deviation of Grouped Frequency Tables

Recall that for grouped data we do not know individual data values, so we cannot describe the typical value of the data with precision. In other words, we cannot find the exact mean, median, or mode. We can, however, determine the best estimate of the measures of center by finding the mean of the grouped data with the formula: Mean of Frequency Table= fm f Mean of Frequency Table= fm f
where f=f= interval frequencies and m = interval midpoints.

Just as we could not find the exact mean, neither can we find the exact standard deviation. Remember that standard deviation describes numerically the expected deviation a data value has from the mean. In simple English, the standard deviation allows us to compare how “unusual” individual data is compared to the mean.

Example 2.34

Find the standard deviation for the data in Table 2.31.

Class Frequency, ff Midpoint, mm fmfm x¯x¯ m-x¯m-x¯ (m-x¯)2(m-x¯)2 f(m-x¯)2f(m-x¯)2
0–2 1 1 1 7.58 -6.58 43.2964 43.2964
3–5 6 4 24 7.58 -3.58 12.8164 76.8984
6–8 10 7 70 7.58 -0.58 0.3364 3.364
9–11 7 10 70 7.58 2.42 5.8564 40.9948
12–14 0 13 0 7.58 5.42 29.3764 0
15–17 2 16 32 7.58 8.42 70.8964 141.7928
SUM (ΣΣ) 26 197 43.2964
Table 2.31

The values in the second, third, and fourth columns of Table 2.31 are used to calculate the mean of the grouped frequency table, the value in the fifth column.

x¯=ΣfmΣf=197267.58.x¯=ΣfmΣf=197267.58.
2.1

After calculating x¯x¯, find the difference, m-x¯m-x¯, for each midpoint, mm. Next, square each difference. In the final column, calculate the product of the frequency and the squared difference for each class.

The table makes it easy to use the formula for calculating the standard deviation of a grouped frequency table:

sx=Σf(m-x¯)2n-1=43.296426-13.50.sx=Σf(m-x¯)2n-1=43.296426-13.50.
2.2

Although the formula is not complicated, these calculations are typically performed using technology.

Try It 2.34

Find the standard deviation for the data from the previous example

ClassFrequency, f
0–21
3–56
6–810
9–117
12–140
15–172
Table 2.32

First, press the STAT key and select 1:Edit

Image of a TI calculator screen. After pressing the STAT key, screen displays top menu choices EDIT, CALC, TESTS. EDIT is selected. Below the top menu, option 1: Edit… is selected.
Figure 2.26

Input the midpoint values into L1 and the frequencies into L2

Image of a TI calculator screen. L1 list shows entries 1, 4, 7, 10, 13, 16. L2 list shows 1, 6, 10, 7, 0, 2.
Figure 2.27

Select STAT, CALC, and 1: 1-Var Stats

Image of a TI calculator screen. After pressing the STAT key, screen displays top menu choices EDIT, CALC, TESTS. CALC is selected. Below the top menu, option 1: 1–Var Stats is selected.
Figure 2.28

Select 2nd then 1 then , 2nd then 2 Enter

Image of a TI calculator screen. At the top of the screen, the label shows 1–Var Stats. Below this label, the screen displays x-bar = 7.576923077, upper-case sigma x = 197, upper-case sigma x-squared = 1799, Sx = 3.500549407, and lower-case sigma = 3.432571103, n = 26.
Figure 2.29

You will see displayed both a population standard deviation, σx, and the sample standard deviation, sx.

Comparing Values from Different Data Sets

The standard deviation is useful when comparing data values that come from different data sets. If the data sets have different means and standard deviations, then comparing the data values directly can be misleading.

  • For each data value, calculate how many standard deviations away from its mean the value is.
  • Use the formula: value = mean + (#ofSTDEVs)(standard deviation); solve for #ofSTDEVs.
  • #ofSTDEVs= value – mean standard deviation #ofSTDEVs= value – mean standard deviation
  • Compare the results of this calculation.

#ofSTDEVs is often called a "z-score"; we can use the symbol z. In symbols, the formulas become:

Sample xx = x¯x¯ + zs z= x   x ¯ s z= x   x ¯ s
Population xx = μ μ + z= x  μ σ z= x  μ σ
Table 2.33

Example 2.35

Problem

Two students, John and Ali, from different high schools, wanted to find out who had the highest GPA when compared to his school. Which student had the highest GPA when compared to his school?

Student GPA School Mean GPA School Standard Deviation
John 2.85 3.0 0.7
Ali 77 80 10
Table 2.34

Try It 2.35

Two swimmers, Angie and Beth, from different teams, wanted to find out who had the fastest time for the 50 meter freestyle when compared to her team. Which swimmer had the fastest time when compared to her team?

SwimmerTime (seconds)Team Mean Time Team Standard Deviation
Angie26.227.20.8
Beth27.330.11.4
Table 2.35

The following lists give a few facts that provide a little more insight into what the standard deviation tells us about the distribution of the data.

For ANY data set, no matter what the distribution of the data is:
  • At least 75% of the data is within two standard deviations of the mean.
  • At least 89% of the data is within three standard deviations of the mean.
  • At least 95% of the data is within 4.5 standard deviations of the mean.
  • This is known as Chebyshev's Rule.
For data having a distribution that is BELL-SHAPED and SYMMETRIC:
  • Approximately 68% of the data is within one standard deviation of the mean.
  • Approximately 95% of the data is within two standard deviations of the mean.
  • More than 99% of the data is within three standard deviations of the mean.
  • This is known as the Empirical Rule.
  • It is important to note that this rule only applies when the shape of the distribution of the data is bell-shaped and symmetric. We will learn more about this when studying the "Normal" or "Gaussian" probability distribution in later chapters.
Order a print copy

As an Amazon Associate we earn from qualifying purchases.

Citation/Attribution

This book may not be used in the training of large language models or otherwise be ingested into large language models or generative AI offerings without OpenStax's permission.

Want to cite, share, or modify this book? This book uses the Creative Commons Attribution License and you must attribute OpenStax.

Attribution information
  • If you are redistributing all or part of this book in a print format, then you must include on every physical page the following attribution:
    Access for free at https://openstax.org/books/introductory-statistics/pages/1-introduction
  • If you are redistributing all or part of this book in a digital format, then you must include on every digital page view the following attribution:
    Access for free at https://openstax.org/books/introductory-statistics/pages/1-introduction
Citation information

© Jun 23, 2022 OpenStax. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution License . The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.