Skip to ContentGo to accessibility pageKeyboard shortcuts menu
OpenStax Logo
Principles of Microeconomics 3e

9.1 How Monopolies Form: Barriers to Entry

Principles of Microeconomics 3e9.1 How Monopolies Form: Barriers to Entry

Menu
Table of contents
  1. Preface
  2. 1 Welcome to Economics!
    1. Introduction
    2. 1.1 What Is Economics, and Why Is It Important?
    3. 1.2 Microeconomics and Macroeconomics
    4. 1.3 How Economists Use Theories and Models to Understand Economic Issues
    5. 1.4 How To Organize Economies: An Overview of Economic Systems
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
  3. 2 Choice in a World of Scarcity
    1. Introduction to Choice in a World of Scarcity
    2. 2.1 How Individuals Make Choices Based on Their Budget Constraint
    3. 2.2 The Production Possibilities Frontier and Social Choices
    4. 2.3 Confronting Objections to the Economic Approach
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  4. 3 Demand and Supply
    1. Introduction to Demand and Supply
    2. 3.1 Demand, Supply, and Equilibrium in Markets for Goods and Services
    3. 3.2 Shifts in Demand and Supply for Goods and Services
    4. 3.3 Changes in Equilibrium Price and Quantity: The Four-Step Process
    5. 3.4 Price Ceilings and Price Floors
    6. 3.5 Demand, Supply, and Efficiency
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  5. 4 Labor and Financial Markets
    1. Introduction to Labor and Financial Markets
    2. 4.1 Demand and Supply at Work in Labor Markets
    3. 4.2 Demand and Supply in Financial Markets
    4. 4.3 The Market System as an Efficient Mechanism for Information
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  6. 5 Elasticity
    1. Introduction to Elasticity
    2. 5.1 Price Elasticity of Demand and Price Elasticity of Supply
    3. 5.2 Polar Cases of Elasticity and Constant Elasticity
    4. 5.3 Elasticity and Pricing
    5. 5.4 Elasticity in Areas Other Than Price
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  7. 6 Consumer Choices
    1. Introduction to Consumer Choices
    2. 6.1 Consumption Choices
    3. 6.2 How Changes in Income and Prices Affect Consumption Choices
    4. 6.3 Behavioral Economics: An Alternative Framework for Consumer Choice
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  8. 7 Production, Costs, and Industry Structure
    1. Introduction to Production, Costs, and Industry Structure
    2. 7.1 Explicit and Implicit Costs, and Accounting and Economic Profit
    3. 7.2 Production in the Short Run
    4. 7.3 Costs in the Short Run
    5. 7.4 Production in the Long Run
    6. 7.5 Costs in the Long Run
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  9. 8 Perfect Competition
    1. Introduction to Perfect Competition
    2. 8.1 Perfect Competition and Why It Matters
    3. 8.2 How Perfectly Competitive Firms Make Output Decisions
    4. 8.3 Entry and Exit Decisions in the Long Run
    5. 8.4 Efficiency in Perfectly Competitive Markets
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  10. 9 Monopoly
    1. Introduction to a Monopoly
    2. 9.1 How Monopolies Form: Barriers to Entry
    3. 9.2 How a Profit-Maximizing Monopoly Chooses Output and Price
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  11. 10 Monopolistic Competition and Oligopoly
    1. Introduction to Monopolistic Competition and Oligopoly
    2. 10.1 Monopolistic Competition
    3. 10.2 Oligopoly
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  12. 11 Monopoly and Antitrust Policy
    1. Introduction to Monopoly and Antitrust Policy
    2. 11.1 Corporate Mergers
    3. 11.2 Regulating Anticompetitive Behavior
    4. 11.3 Regulating Natural Monopolies
    5. 11.4 The Great Deregulation Experiment
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  13. 12 Environmental Protection and Negative Externalities
    1. Introduction to Environmental Protection and Negative Externalities
    2. 12.1 The Economics of Pollution
    3. 12.2 Command-and-Control Regulation
    4. 12.3 Market-Oriented Environmental Tools
    5. 12.4 The Benefits and Costs of U.S. Environmental Laws
    6. 12.5 International Environmental Issues
    7. 12.6 The Tradeoff between Economic Output and Environmental Protection
    8. Key Terms
    9. Key Concepts and Summary
    10. Self-Check Questions
    11. Review Questions
    12. Critical Thinking Questions
    13. Problems
  14. 13 Positive Externalities and Public Goods
    1. Introduction to Positive Externalities and Public Goods
    2. 13.1 Investments in Innovation
    3. 13.2 How Governments Can Encourage Innovation
    4. 13.3 Public Goods
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  15. 14 Labor Markets and Income
    1. Introduction to Labor Markets and Income
    2. 14.1 The Theory of Labor Markets
    3. 14.2 Wages and Employment in an Imperfectly Competitive Labor Market
    4. 14.3 Market Power on the Supply Side of Labor Markets: Unions
    5. 14.4 Bilateral Monopoly
    6. 14.5 Employment Discrimination
    7. 14.6 Immigration
    8. Key Terms
    9. Key Concepts and Summary
    10. Self-Check Questions
    11. Review Questions
    12. Critical Thinking Questions
  16. 15 Poverty and Economic Inequality
    1. Introduction to Poverty and Economic Inequality
    2. 15.1 Drawing the Poverty Line
    3. 15.2 The Poverty Trap
    4. 15.3 The Safety Net
    5. 15.4 Income Inequality: Measurement and Causes
    6. 15.5 Government Policies to Reduce Income Inequality
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  17. 16 Information, Risk, and Insurance
    1. Introduction to Information, Risk, and Insurance
    2. 16.1 The Problem of Imperfect Information and Asymmetric Information
    3. 16.2 Insurance and Imperfect Information
    4. Key Terms
    5. Key Concepts and Summary
    6. Self-Check Questions
    7. Review Questions
    8. Critical Thinking Questions
    9. Problems
  18. 17 Financial Markets
    1. Introduction to Financial Markets
    2. 17.1 How Businesses Raise Financial Capital
    3. 17.2 How Households Supply Financial Capital
    4. 17.3 How to Accumulate Personal Wealth
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  19. 18 Public Economy
    1. Introduction to Public Economy
    2. 18.1 Voter Participation and Costs of Elections
    3. 18.2 Special Interest Politics
    4. 18.3 Flaws in the Democratic System of Government
    5. Key Terms
    6. Key Concepts and Summary
    7. Self-Check Questions
    8. Review Questions
    9. Critical Thinking Questions
    10. Problems
  20. 19 International Trade
    1. Introduction to International Trade
    2. 19.1 Absolute and Comparative Advantage
    3. 19.2 What Happens When a Country Has an Absolute Advantage in All Goods
    4. 19.3 Intra-Industry Trade between Similar Economies
    5. 19.4 The Benefits of Reducing Barriers to International Trade
    6. Key Terms
    7. Key Concepts and Summary
    8. Self-Check Questions
    9. Review Questions
    10. Critical Thinking Questions
    11. Problems
  21. 20 Globalization and Protectionism
    1. Introduction to Globalization and Protectionism
    2. 20.1 Protectionism: An Indirect Subsidy from Consumers to Producers
    3. 20.2 International Trade and Its Effects on Jobs, Wages, and Working Conditions
    4. 20.3 Arguments in Support of Restricting Imports
    5. 20.4 How Governments Enact Trade Policy: Globally, Regionally, and Nationally
    6. 20.5 The Tradeoffs of Trade Policy
    7. Key Terms
    8. Key Concepts and Summary
    9. Self-Check Questions
    10. Review Questions
    11. Critical Thinking Questions
    12. Problems
  22. A | The Use of Mathematics in Principles of Economics
  23. B | Indifference Curves
  24. C | Present Discounted Value
  25. Answer Key
    1. Chapter 1
    2. Chapter 2
    3. Chapter 3
    4. Chapter 4
    5. Chapter 5
    6. Chapter 6
    7. Chapter 7
    8. Chapter 8
    9. Chapter 9
    10. Chapter 10
    11. Chapter 11
    12. Chapter 12
    13. Chapter 13
    14. Chapter 14
    15. Chapter 15
    16. Chapter 16
    17. Chapter 17
    18. Chapter 18
    19. Chapter 19
    20. Chapter 20
  26. References
  27. Index

Learning Objectives

By the end of this section, you will be able to:

  • Distinguish between a natural monopoly and a legal monopoly.
  • Explain how economies of scale and the control of natural resources led to the necessary formation of legal monopolies
  • Analyze the importance of trademarks and patents in promoting innovation
  • Identify examples of predatory pricing

Because of the lack of competition, monopolies tend to earn significant economic profits. These profits should attract vigorous competition as we described in Perfect Competition, and yet, because of one particular characteristic of monopoly, they do not. Barriers to entry are the legal, technological, or market forces that discourage or prevent potential competitors from entering a market. Barriers to entry can range from the simple and easily surmountable, such as the cost of renting retail space, to the extremely restrictive. For example, there are a finite number of radio frequencies available for broadcasting. Once an entrepreneur or firm has purchased the rights to all of them, no new competitors can enter the market.

In some cases, barriers to entry may lead to monopoly. In other cases, they may limit competition to a few firms. Barriers may block entry even if the firm or firms currently in the market are earning profits. Thus, in markets with significant barriers to entry, it is not necessarily true that abnormally high profits will attract new firms, and that this entry of new firms will eventually cause the price to decline so that surviving firms earn only a normal level of profit in the long run.

There are five types of monopoly, based on the types of barriers to entry they exploit.

Natural Monopoly

Economies of scale can combine with the size of the market to limit competition. (We introduced this theme in Production, Cost and Industry Structure). Figure 9.2 presents a long-run average cost curve for the airplane manufacturing industry. It shows economies of scale up to an output of 8,000 planes per year and a price of P0, then constant returns to scale from 8,000 to 20,000 planes per year, and diseconomies of scale at a quantity of production greater than 20,000 planes per year.

Now consider the market demand curve in the diagram, which intersects the long-run average cost (LRAC) curve at an output level of 5,000 planes per year and at a price P1, which is higher than P0. In this situation, the market has room for only one producer. If a second firm attempts to enter the market at a smaller size, say by producing a quantity of 4,000 planes, then its average costs will be higher than those of the existing firm, and it will be unable to compete. If the second firm attempts to enter the market at a larger size, like 8,000 planes per year, then it could produce at a lower average cost—but it could not sell all 8,000 planes that it produced because of insufficient demand in the market.

This graph illustrates a demand curve intersecting a u-shaped long-run average cost curve. The y-axis measures price and cost, and x-axis measures output. The demand curve intersects the cost curve on its downward-sloping part, before the bottom of the curve, where cost is minimized. Because of this intersection point, this graph shows a natural monopoly.
Figure 9.2 Economies of Scale and Natural Monopoly In this market, the demand curve intersects the long-run average cost (LRAC) curve at its downward-sloping part. A natural monopoly occurs when the quantity demanded is less than the minimum quantity it takes to be at the bottom of the long-run average cost curve.

Economists call this situation, when economies of scale are large relative to the quantity demanded in the market, a natural monopoly. Natural monopolies often arise in industries where the marginal cost of adding an additional customer is very low, once the fixed costs of the overall system are in place. This results in situations where there are substantial economies of scale. For example, once a water company lays the main water pipes through a neighborhood, the marginal cost of providing water service to another home is fairly low. Once the electric company installs lines in a new subdivision, the marginal cost of providing additional electrical service to one more home is minimal. It would be costly and duplicative for a second water company to enter the market and invest in a whole second set of main water pipes, or for a second electricity company to enter the market and invest in a whole new set of electrical wires. These industries offer an example where, because of economies of scale, one producer can serve the entire market more efficiently than a number of smaller producers that would need to make duplicate physical capital investments.

A natural monopoly can also arise in smaller local markets for products that are difficult to transport. For example, cement production exhibits economies of scale, and the quantity of cement demanded in a local area may not be much larger than what a single plant can produce. Moreover, the costs of transporting cement over land are high, and so a cement plant in an area without access to water transportation may be a natural monopoly.

Control of a Physical Resource

Another type of monopoly occurs when a company has control of a scarce physical resource. In the U.S. economy, one historical example of this pattern occurred when ALCOA—the Aluminum Company of America—controlled most of the supply of bauxite, a key mineral used in making aluminum. Back in the 1930s, when ALCOA controlled most of the bauxite, other firms were simply unable to produce enough aluminum to compete.

As another example, the majority of global diamond production is controlled by DeBeers, a multi-national company that has mining and production operations in South Africa, Botswana, Namibia, and Canada. It also has exploration activities on four continents, while directing a worldwide distribution network of rough cut diamonds. Although in recent years they have experienced growing competition, their impact on the rough diamond market is still considerable.

Legal Monopoly

For some products, the government erects barriers to entry by prohibiting or limiting competition. Under U.S. law, no organization but the U.S. Postal Service is legally allowed to deliver first-class mail. Many states or cities have laws or regulations that allow households a choice of only one electric company, one water company, and one company to pick up the garbage. Most legal monopolies are utilities—products necessary for everyday life—that are socially beneficial. As a consequence, the government allows producers to become regulated monopolies, to ensure that customers have access to an appropriate amount of these products or services. Additionally, legal monopolies are often subject to economies of scale, so it makes sense to allow only one provider.

Promoting Innovation

Innovation takes time and resources to achieve. Suppose a company invests in research and development and finds the cure for the common cold. In this world of near ubiquitous information, other companies could take the formula, produce the drug, and because they did not incur the costs of research and development (R&D), undercut the price of the company that discovered the drug. Given this possibility, many firms would choose not to invest in research and development, and as a result, the world would have less innovation. To prevent this from happening, the Constitution of the United States specifies in Article I, Section 8: “The Congress shall have Power . . . to Promote the Progress of Science and Useful Arts, by securing for limited Times to Authors and Inventors the Exclusive Right to their Writings and Discoveries.” Congress used this power to create the U.S. Patent and Trademark Office, as well as the U.S. Copyright Office. A patent gives the inventor the exclusive legal right to make, use, or sell the invention for a limited time. In the United States, exclusive patent rights last for 20 years. The idea is to provide limited monopoly power so that innovative firms can recoup their investment in R&D, but then to allow other firms to produce the product more cheaply once the patent expires.

A trademark is an identifying symbol or name for a particular good, like Chiquita bananas, Chevrolet cars, or the Nike “swoosh” that appears on shoes and athletic gear. Between 2003 and 2019, roughly 6.8 million trademarks were registered with the U.S. government. A firm can renew a trademark repeatedly, as long as it remains in active use.

A copyright, according to the U.S. Copyright Office, “is a form of protection provided by the laws of the United States for ‘original works of authorship’ including literary, dramatic, musical, architectural, cartographic, choreographic, pantomimic, pictorial, graphic, sculptural, and audiovisual creations.” No one can reproduce, display, or perform a copyrighted work without the author's permission. Copyright protection ordinarily lasts for the life of the author plus 70 years.

Roughly speaking, patent law covers inventions and copyright protects books, songs, and art. However, in certain areas, like the invention of new software, it has been unclear whether patent or copyright protection should apply. There is also a body of law known as trade secrets. Even if a company does not have a patent on an invention, competing firms are not allowed to steal their secrets. One famous trade secret is the formula for Coca-Cola, which is not protected under copyright or patent law, but is simply kept secret by the company.

Taken together, we call this combination of patents, trademarks, copyrights, and trade secret law intellectual property, because it implies ownership over an idea, concept, or image, not a physical piece of property like a house or a car. Countries around the world have enacted laws to protect intellectual property, although the time periods and exact provisions of such laws vary across countries. There are ongoing negotiations, both through the World Intellectual Property Organization (WIPO) and through international treaties, to bring greater harmony to the intellectual property laws of different countries to determine the extent to which those in other countries will respect patents and copyrights of those in other countries.

Government limitations on competition used to be more common in the United States. For most of the twentieth century, only one phone company—AT&T—was legally allowed to provide local and long distance service. From the 1930s to the 1970s, one set of federal regulations limited which destinations airlines could choose to fly to and what fares they could charge. Another set of regulations limited the interest rates that banks could pay to depositors; yet another specified how much trucking firms could charge customers.

What products we consider utilities depends, in part, on the available technology. Fifty years ago, telephone companies provided local and long distance service over wires. It did not make much sense to have many companies building multiple wiring systems across towns and the entire country. AT&T lost its monopoly on long distance service when the technology for providing phone service changed from wires to microwave and satellite transmission, so that multiple firms could use the same transmission mechanism. The same thing happened to local service, especially in recent years, with the growth in cellular phone systems.

The combination of improvements in production technologies and a general sense that the markets could provide services adequately led to a wave of deregulation, starting in the late 1970s and continuing into the 1990s. This wave eliminated or reduced government restrictions on the firms that could enter, the prices that they could charge, and the quantities that many industries could produce, including telecommunications, airlines, trucking, banking, and electricity.

Around the world, from Europe to Latin America to Africa and Asia, many governments continue to control and limit competition in what those governments perceive to be key industries, including airlines, banks, steel companies, oil companies, and telephone companies.

Link It Up

Vist this website for examples of some pretty bizarre patents.

Intimidating Potential Competition

Businesses have developed a number of schemes for creating barriers to entry by deterring potential competitors from entering the market. One method is known as predatory pricing, in which a firm uses the threat of sharp price cuts to discourage competition. Predatory pricing is a violation of U.S. antitrust law, but it is difficult to prove.

Consider a large airline that provides most of the flights between two particular cities. A new, small start-up airline decides to offer service between these two cities. The large airline immediately slashes prices on this route to the bone, so that the new entrant cannot make any money. After the new entrant has gone out of business, the incumbent firm can raise prices again.

After the company repeats this pattern once or twice, potential new entrants may decide that it is not wise to try to compete. Small airlines often accuse larger airlines of predatory pricing: in the early 2000s, for example, ValuJet accused Delta of predatory pricing, Frontier accused United, and Reno Air accused Northwest. In 2015, the Justice Department ruled against American Express and Mastercard for imposing restrictions on retailers that encouraged customers to use lower swipe fees on credit transactions.

In some cases, large advertising budgets can also act as a way of discouraging the competition. If the only way to launch a successful new national cola drink is to spend more than the promotional budgets of Coca-Cola and Pepsi Cola, not too many companies will try. A firmly established brand name can be difficult to dislodge.

Summing Up Barriers to Entry

Table 9.1 lists the barriers to entry that we have discussed. This list is not exhaustive, since firms have proved to be highly creative in inventing business practices that discourage competition. When barriers to entry exist, perfect competition is no longer a reasonable description of how an industry works. When barriers to entry are high enough, monopoly can result.

Barrier to Entry Government Role? Example
Natural monopoly Government often responds with regulation (or ownership) Water and electric companies
Control of a physical resource No DeBeers for diamonds
Legal monopoly Yes Post office, past regulation of airlines and trucking
Patent, trademark, and copyright Yes, through protection of intellectual property New drugs or software
Intimidating potential competitors Somewhat Predatory pricing; well-known brand names
Table 9.1 Barriers to Entry
Order a print copy

As an Amazon Associate we earn from qualifying purchases.

Citation/Attribution

Want to cite, share, or modify this book? This book uses the Creative Commons Attribution License and you must attribute OpenStax.

Attribution information
  • If you are redistributing all or part of this book in a print format, then you must include on every physical page the following attribution:
    Access for free at https://openstax.org/books/principles-microeconomics-3e/pages/1-introduction
  • If you are redistributing all or part of this book in a digital format, then you must include on every digital page view the following attribution:
    Access for free at https://openstax.org/books/principles-microeconomics-3e/pages/1-introduction
Citation information

© Jul 24, 2023 OpenStax. Textbook content produced by OpenStax is licensed under a Creative Commons Attribution License . The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.